Cable clips for edges the EdgeClip at a glance from buzai232's blog

EdgeClip cable clips for edges are tiny cable tie mounts.These special plastic components are held in place by built-in spring steel clamps.The EdgeClip is a cable-fastening solution that enables the flexible routing of wires, cable harnesses, conduits and pipes in a variety of industrial applications,C Type Magic Cable Ties including the automotive sector.We have the right solution for you: The EdgeClip Mini perfect for restricted spaces and narrow edges. The smallest EdgeClip model is specially tailored to the construction needs of our industrial customers.

The small dimensions of the EdgeClip Mini help constructors when there is limited space available for cable routing.This mini version of our cable clip for edges keeps everything securely fastened, despite using 30% less material than the larger cable clips that we manufacture for thicker edges. Thanks to its compact housing, the EdgeClip Mini is the only cable clip on the market that is suitable for securely fastening cables to very low square and double seam edges or narrow angled seam edges with thicknesses between .5 mm and 2.5 mm.

The EdgeClip plastic housing is made of high-impact-modified and heat-stabilised nylon, which is also known as polyamide PA66HIRHS a material that is resistant to UV radiation, weather-induced chemical reactions and temperature fluctuations between -40??C and 105??C.The built-in, chrome-free, galvanised spring steel clamp digs itself firmly into softer materials. The barb effect is so strong that it isn?ˉt even easy to prise away this tiny cable clip with pliers.

The barb effect of the spring steel clamps in all other HellermannTyton EdgeClip products have been designed for various surfaces and hardness levels.Depending on requirements, we recommend that an engineer review the application of the EdgeClip model concerned. If the base material of the edge (sheet metal or plastic) exhibits a hardness of less than 410 HV 10, the offset and interlocking claws of the EdgeClip Mini can withstand a pull-off force of 5 kg.When compared with larger models, the design of the EdgeClip Mini facilitates the optimum positioning of the cable bundle on the edge, as well as the right position of the cable tie head in relation to the bundle for the application concerned.

Previous post     
     Next post
     Blog home

The Wall

No comments
You need to sign in to comment