What is Metal Cladding? from buzai232's blog

Cladding is a term given to an outer layer that is bonded to a core, or inner layer. Metal cladding is specifically used to describe a metal outer layer—cladding—that is bonded to a core metal material. The outer and inner metals are typically dissimilar.To get more news about facades architecture, you can visit mesh-fabrics official website.

Metal cladding is used extensively in manufacturing because of the potential for cost savings. For example, the U.S. Mint utilizes a metal cladding process to manufacture coins. Dimes, quarters, half-dollars and dollar coins are clad. The core and cladding of these coins range from manganese brass, copper, alloy metals, nickel, and zinc, while the cladding on the outsides may be copper, nickel, or a mix of metals, called an alloy. When certain metals are scarce more costly to obtain, metal cladding makes it possible to use a much lower percentage of that metal, while bonding it to a plentiful, less expensive metal.

Metal cladding can also be seen in everyday items, such as non-stick cookware, stainless steel cookware, locks, automobile parts, and other metal products.

Metal cladding is also used in construction materials. In this case, the metal exterior may be bonded to a non-metal core. Metal cladding in construction is used for cost savings, but also to enhance the functionality of the façade. The façade, or cladding, provides certain desirable benefits, while the core may provide another set of benefits. For example, metal-cladded siding will protect against rain, while its core, possibly foam core, which provides insulation properties.

The process of doing metal cladding is done within the industry of metallurgy. Metal cladding involves heating the various metals up to enormous temperatures, pouring it into molds, and then allowing it to cool down. There are additional chemicals mixed with the metals in order to ensure an unbreakable chemical bond. Because of the specialized process and equipment needed to clad metal, it is almost solely done in specialized metallurgy plants by skilled tradesmen, or with dedicated robotic equipment.