User blogs

Black Film Faced Plywood


Film faced plywood, also known as film formwork plywood, is as a specialized type of plywood in construction. In recent years, it has been more and more favored by many because it helps to reduce construction time, the number of workers and the cost of materials. Although found out after other formworks such as aluminum, steel and plastic formwork, film faced plywood still has a high rank in the market thanks to its strength.To get more news about commercial plywood, you can visit boosterplywood.com official website.

First of all, the raw material (wood log) will be selected and stored at our factory/workshop. The raw material standards can differ between types of wood, but normally we choose the logs of maximum 1.3m in length and minimum 10cm in diameter.

Then, we use a veneer lathe to peel the logs, in which way the wood is compressed with a nose bar while the veneer knife cuts the blocks into veneers that are typically 1.7mm thick. The first bit of the veneer which includes lumber bark shall be cut off. The veneer pieces are then clipped to a usable width, typically 640m or as request, for shrinkage and trim.

The veneers are then dried to a certain moisture content of below 12%. Thanks to the gifted tropical weather, our veneers are normally dried naturally under the sun for 1 or 2 days until their moisture reaches the right level. However, during the rain season, we use driers/kilns to dry our veneers quicker (1.5 days) and guarantee the right moisture content for our final goods.

When the veneers have been dried, checked and divided into different quality types, they will go through a glue spreading machine so a specific kind glue can be covered all over the veneers' surface.

Our workers now will check the plywood core to see if veneers are properly glued and surface is perfectly flat, they will handle the defects before putting the core into the hot press machine.

The laid-up assembly of veneers then is sent to a hot press in which it is consolidated under heat and pressure. Hot pressing has two main objectives: (1) to press the glue into a thin layer over each sheet of veneer; and (2) to activate the thermosetting resins. The time and temperature vary depending on the wood, resin types and customers' requests.

After the hot pressing is completed, the workers will handle the surface of the board, cut the edges of the boards, handle the edges of the boards, sanding the surface of the boards 2 to 3 times.

The problem with mass production is that you cannot check every single product manufactured or sold. However, the problem will be solved if you can control the producing process.

As you may recognize above, our company has deep knowledge of both our products and the production process. However, it is only the tip of the iceberg. We have the ability to control our product quality through good and durable machinery, standardized process, well-trained workers and dedicated quality control teams.

We are also very proud to have been able to consult for some of our suppliers and business partners about more effective techniques as well as management experience, helping them partly reduce their production and management costs.

buzai232 Aug 12, 07:45PM · Tags: film faced plywood

Global Film Faced Plywood Market Size 2022

"Film Faced Plywood Market" Insights 2022 By Types (Birch Film Faced Plywood, Poplar Film Faced Plywood, Combi Film Faced Plywood, Hardwood Film Faced Plywood), Applications (Wall Panels, Flooring, Roofs, Shuttering Formwork Plywood), Regions and Forecast to 2028. The global Film Faced Plywood market size is projected to reach multi million by 2028, in comparison to 2022, with unexpected CAGR during the forecast period, the Film Faced Plywood Market Report Contains124pages Including Full TOC, Tables and Figures, and Chart with In-depth Analysis Pre and Post COVID-19 Market Outbreak Impact Analysis and Situation by Region.To get more news about film faced plywood, you can visit boosterplywood.com official website.

This report focuses on global and United States Film Faced Plywood market, also covers the segmentation data of other regions in regional level and county level.

Due to the COVID-19 pandemic, the global Film Faced Plywood market size is estimated to be worth USD million in 2022 and is forecast to a readjusted size of USD million by 2028 with a CAGR of % during the review period. Fully considering the economic change by this health crisis, by Type, Birch Film Faced Plywood accounting for % of the Film Faced Plywood global market in 2021, is projected to value USD million by 2028, growing at a revised % CAGR in the post-COVID-19 period. While by Application, Wall Panels was the leading segment, accounting for over percent market share in 2021, and altered to an % CAGR throughout this forecast period.
Film Faced Plywood market is segmented by region (country), players, by Type and by Application. Players, stakeholders, and other participants in the global Film Faced Plywood market will be able to gain the upper hand as they use the report as a powerful resource. The segmental analysis focuses on revenue and forecast by region (country), by Type and by Application for the period 2017-2028.

For United States market, this report focuses on the Film Faced Plywood market size by players, by Type and by Application, for the period 2017-2028. The key players include the global and local players, which play important roles in United States.Film Faced Plywood Market Report identifies various key players in the market and sheds light on their strategies and collaborations to combat competition. The comprehensive report provides a two-dimensional picture of the market. By knowing the global revenue of manufacturers, the global price of manufacturers, and the production by manufacturers during the forecast period of 2022 to 2028, the reader can identify the footprints of manufacturers in the Film Faced Plywood industry.

As well as providing an overview of successful marketing strategies, market contributions, and recent developments of leading companies, the report also offers a dashboard overview of leading companies' past and present performance. Several methodologies and analyses are used in the research report to provide in-depth and accurate information about the Film Faced Plywood Market.

The current market dossier provides market growth potential, opportunities, drivers, industry-specific challenges and risks market share along with the growth rate of the global Film Faced Plywood market. The report also covers monetary and exchange fluctuations, import-export trade, and global market

status in a smooth-tongued pattern. The SWOT analysis, compiled by industry experts, Industry Concentration Ratio and the latest developments for the global Film Faced Plywood market share are covered in a statistical way in the form of tables and figures including graphs and charts for easy understanding.

buzai232 Aug 12, 07:33PM · Tags: film faced plywood

Rouble trouble, a unique opportunity for India

In a year which saw a storm in all currency markets, Russia’s rouble has come full circle.To get more news about Exness外汇, you can visit wikifx.com official website.

On March 10, the rouble hit a low of 150 against the US dollar from a stable level near 70 for the past two years.But on June 26, doing a volte face, rouble reached almost 50 against the US dollar, its strongest level in seven years. What is happening with the rouble and how does it impact India?

The West imposed draconian sanctions on Russia in response to the Ukraine invasion. The immediate impact was the collapse of rouble. Russia took many measures to arrest the fall. The Russian central bank mandated that 80 per cent of foreign earnings of Russian firms had to be converted to rouble. It increased interest rates to 20 per cent from 9.5 per cent in one go.

Russia decreed that hostile country buyers had to pay in rouble for buying natural gas. This resulted in increased demand for roubles and its appreciation. This was aided by a historical rise in the prices of oil and gas and continued demand for Russian energy products. An appreciating rouble gave Russians a sense of pride which overshadowed the mounting losses in Ukraine.

But the s,tory here is also somewhat deeper. There has been a complete collapse of imports as they fell to multi-decade lows due to the sanctions. Russia was also removed from the global payment system SWIFT. Hence, there is no need or possibility for them to sell roubles to buy foreign exchange. So ruble is currently like an illiquid unlisted firm with no way to determine its fair price. If a currency is not traded in the market and the demand for the foreign currency evaporates, what is its true equilibrium price?
In the short term, the immediate benefit to India is to buy cheaper crude oil from Russia. In the medium term, Western countries vacating the Russian business space can provide uncontested market access to Indian products. In the long run, diversification of energy sources away from West Asia is a critical aspect of energy security and consequently national security.

With the current restrictions expected to continue, it would be extremely difficult to use reserve currencies for trade with Russia. As per reports, the solutions being discussed are a ‘rupee-rouble’ mechanism and a new BRICS currency based on a basket of member currencies.

In international trade, profitability is dependent on the price of products and exchange rate between the currencies. Since the value of rouble is indeterminable, it cannot be blindly used in settling trade. Else all gains may turn out to be merely paper profits.

Since convertible currencies like USD are unusable, the best solution for India is to insist on a rupee payment mechanism. The imports by India and Russia would be both settled in INR. This would be a concrete step towards internationalisation of the rupee.

Indian firm UltraTech recently used Chinese yuan to buy Russian coal. This strengthens the internationalisation process of Yuan and given our competitive interests in the region, is not the best way out.

Internationalisation of rupee will be beneficial for India as it lowers transaction costs of trade and investment operations by mitigating exchange rate risk. By decreasing demand for foreign exchange, it supports the value of rupee. It will help our companies with lower hedging and borrowing costs and provides our financial companies scope for global expansion. It will also give India political leverage and increased soft power. These will go a long way in establishing a leadership position for India in the world in general and in the Asia Pacific region in particular.

Russia may have reservations on this due to the limited use of the excess rupee balances arising out of the bilateral trade deficit. But in the long term with Indian companies displacing West in exports to Russia, the trade deficit is expected to narrow. The process has already started. Confederation of All India Traders (CAIT) said that trade organisations from Russia are seeking assistance to connect with Indian manufacturers, traders and exporters.

The RBI noted in its report that internationalisation of rupee is inevitable, but it did point out some risks involved. This makes the simultaneous pursuit of exchange rate stability and a domestically oriented monetary policy more challenging. It can potentially limit the ability of the central bank to control domestic money supply and influence interest rates. However no worthy goal comes without some risks and we should embrace the challenges to claim our rightful place in the world. The RBI by recently allowing the trade to be denominated and invoiced in the Indian rupee has taken the first step.

India can use this opportunity to strengthen its ties with Russia. Holistically, this situation can provide a unique opportunity to strengthen our economic, energy and national security.

buzai232 Aug 10, 08:14PM · Tags: wikifx

Anti-slip Film Faced Plywood veneer seam problems and production methods

In daily life, we often come into contact with Anti-slip Film Faced Plywood. Many people do not know about plywood. What is plywood? According to the introduction of plywood manufacturers, plywood is cut into veneer from wood segments or by planed wood. It is a three-layer or multi-layer plate-like material that is cut into thin wood and glued with adhesive. Generally, odd-numbered veneers are used, and the fiber directions of adjacent layers of veneers are glued perpendicular to each other.To get more news about commercial plywood, you can visit boosterplywood.com official website.

Anti-slip Film Faced Plywood is one of the commonly used materials for furniture. It is one of the three major panels of wood-based panels. It can also be used for aircraft, ships, trains, cars, buildings and packaging boxes. A group of veneers are generally divided into adjacent layers The wood grain directions are perpendicular to each other and the blanks are glued together. Generally, the surface board and the inner layer board are symmetrically arranged on the two ends of the center layer or the board core. Constrained under the condition of heating or non-heating, the number of layers is generally odd, a few are even, and the physical and mechanical properties of the vertical and horizontal directions are relatively small.

The commonly used types of Anti-slip Film Faced Plywood are three plywood, five plywood, etc. Plywood can improve the efficiency of wood and plywood, which is an important way to save wood.

Today's furniture boards, due to the different sizes of logs, sometimes need to be spliced. Today, let Anti-slip Film Faced Plywood manufacturers introduce to us the problems and solutions when splicing plywood.

One is that it is found to be too tight or too loose after sewing. This problem is mainly caused by improper adjustment of the feeding and tightening roller of the sewing machine. In such a situation, we only need to adjust the work surface of the sewing machine. The next pair of tapered squeeze rollers to fit.

The second kind that often occurs is that the ends of the veneer that are spelled out are uneven. This situation is mainly caused by the improper operation of the seam. When feeding on the machine with glue in the longitudinal direction, the ends of the two veneers are not aligned or single. If the board is not formed into a rectangle when the edges are aligned, it is necessary to know that there should be a datum when the veneer is aligned, and the veneer cannot be cut into a parallelogram.

The third situation is that the adhesive tape is not firmly attached after the Anti-slip Film Faced Plywood is spliced, resulting in not being strong. This happens because the adhesive tape is not sufficiently wet, and the temperature of the heating roller of the plywood manufacturer's seaming machine is too high or too low. The pressure of the upper roll is not enough. The treatment method is simple, and the tape can be fully wetted with water, check the heating roll, and increase the pressing force of the upper roll.

buzai232 Aug 10, 08:08PM · Tags: film faced plywood

Who Will Bend the Knee in RaaS Game of Thrones in 2022?

For several years, ransomware attacks have dominated the headlines as arguably the most impactful cyber threats. The Ransomware-as-a-Service (RaaS) model at the time opened the cybercrime career path to lesser skilled criminals which eventually led to more breaches and higher criminal profits.To get more news about RaaS, you can visit glprobotics.com official website.

For a long time, RaaS admins and developers were prioritized as the top targets, often neglecting the affiliates since they were perceived as less skilled. This, combined with the lack of disruptions in the RaaS ecosystem, created an atmosphere where those lesser-skilled affiliates could thrive and grow into very competent cybercriminals, eventually with a mind of their own.

In a response to the Colonial Pipeline attack, the popular cybercrime forums have banned ransomware actors from advertising. Now, the RaaS groups no longer have a third-party platform on which to actively recruit, show their seniority, offer escrow, have their binaries tested by moderators, or settle disputes. The lack of visibility has made it harder for RaaS groups to establish or maintain credibility and will make it harder for RaaS developers to maintain their current top tier position in the underground.

These events have undermined their trusted position. Ransomware has generated billions of dollars in recent years and it’s only a matter of time before more individuals who believe they aren’t getting their fair share become unhappy.

The first signs of this happening are already visible as described in our blog on the Groove Gang, a cyber-criminal gang that branched off from classic RaaS to specialize in computer network exploitation (CNE), exfiltrate sensitive data and, if lucrative, partner with a ransomware team to encrypt the organization’s network. McAfee Enterprise ATR believes, with high confidence, that the Groove gang is associated with the Babuk gang, either as a former affiliate or subgroup. These cybercriminals are happy to put aside previous Ransomware-as-a-Service hierarchies to focus on the ill-gotten gains to be made from controlling victim’s networks, rather than the previous approach which prioritized control of the ransomware itself.

Trust in a few things remains important even among cybercriminals underground, such as keeping your word and paying people what they deserve. Cybercriminals aren’t immune from feeling like employees whose contributions aren’t being adequately rewarded. When this happens, these bad actors cause problems within the organization. Ransomware has been generating billions of dollars in recent years and with revenue like that, it was inevitable that some individuals who believe they aren’t getting their fair share become unhappy and let the cybercrime world know it.

Recently, a former Conti affiliate was unhappy with their financial portion and decided to disclose the complete Conti attack playbook and their Cobalt Strike infrastructure online. In the past, McAfee ATR has been approached by individuals affiliated with certain RaaS groups expressing grudges with other RaaS members and admins, claiming they haven’t been paid in time or that their share wasn’t proportionate to the amount of work they put in.

In 2022, expect more self-reliant cybercrime groups to rise and shift the balance of power within the RaaS eco-climate from those who control the ransomware to those who control the victim’s networks.

buzai232 Aug 10, 07:48PM · Tags: robots as a service

Best IoT door locks available to buy right now

Like much of almost everything else around us, the humble lock on our front doors too has gone for a smart makeover. The benefits to that are many, the first being that you will be saved from carrying a physical key all along. How many of us have had the experience of losing that key and having had a hard time getting into our own homes? But you can always call Locksmith Aurora for help.To get more news about fingerprint smart door lock, you can visit securamsys.com official website.

None of that with smart locks which allows for keyless operations, while there is the additional advantage of getting access to the smart locks just about from anywhere. Things though aren’t as simple when it comes to implementing the same on your home, more so when it has a direct bearing on the safety and security of your home. You got to know the nuances in the specifications of each before zeroing in on one that you think will suit your requirements.Here, we aim to provide you with an outline of some of the best IoT smart locks currently available so that you can make an informed purchase, or at least have an idea of what it is all about. Read On.

August Wi-Fi Smart Lock

The August Wi-Fi Smart Lock is one of the best you can have for complete all-round security. It also comes with integrated Wi-Fi which will save you from having to buy an additional Connect module that could set you back another $80. The smart lock otherwise comes with a retrofit August lock as well as a DoorSense open-close sensor. It is also almost half the size of its predecessor as well.

Among the other benefits of the smart lock is its compatibility with Siri, Google Assistant, and Alexa, besides both the Android and iOS platforms. The smart lock also provides unlimited user access and code while there will also be a log maintained, detailing all that has happened on the front door. It is easy to install too, thereby making it one of the best IoT smart locks with an all-round performance.

August Smart Lock and Connect

The third-generation smart lock from August is still good enough to make it to number two on this list. It comes integrated with a Connect Wi-Fi module as well as a DoorSense open-close sensor. Installation is easy too, for which you won’t have to get rid of your deadbolt lock as well. The smart lock can well supplement the deadbolt lock you might already have installed.

The smart lock also comes with a relatively cheaper price tag though that also entails making a few compromises. For instance, there is no Apple HomeKit compatibility while Z-Wave smarts too are out of bounds. Both of these would have allowed you to connect to a smart hub. The lock, otherwise, is compatible with Google Assistant and Alexa.

Schlage Encode Smart Lock

This too comes across as a basic no-frills smart lock. It comes with integrated Wi-Fi and is compatible with Amazon Alexa and Google Assistant. What that means is it can be operated simply using voice commands. It offers up to a max of 100 temporary or permanent keys by pairing with the Schlage Home app or Amazon Key. The keys can be entered via the capacitive touchpad it comes with.

Then there is an integrated alarm as well which will go off if there is a leak suspected. Installation is easy too and can be fitted onto any standard door as well. The smart lock integrates with Ring devices as well and offers multiple scheduling options.

Yale Conexis Smart Door Lock

The Yale Conexis smart door lock is another great choice, especially if you have a PVC or a composite door. In fact, the smart lock can easily fit onto any door that offers a five-point locking mechanism. Also, the Yale smart lock is unique in that it offers Bluetooth connectivity instead of Wi-Fi. The associated smartphone app allows for keyless operations and will allow entry to the keyholder as well as five other designated by you. There also is the RFID tag as well which serves as the backup. All of this makes the Conexis a really smart choice for a basic smart lock.

Ultraloq U-Bolt Smart Lock

The Ultraloq U-Bolt Smart Lock is one of the best around when it comes to providing complete all-round protection. For this, the U-Bolt offers five different levels of security mechanism, which includes the ability to lock or unlock via the smartphone. Then there is the shake-to-open feature as well, as is the anti-peek keypad and auto-unlock feature. Plus, there is the physical key as well should you need it.

The U-Bolt also offers a bridge too, which serves as a means to connect to Google Assistant and Amazon Alexa. The same also allows for remote control operations. What’s more, the smart lock can also be programmed to allow entrance during specific dates and duration of time on a temporary basis. This will be handy when say, you have an event at home and there would be guests coming in.

buzai232 Aug 10, 07:17PM · Tags: fingerprint front door lock

Shanghai eases into gradually reopening from its COVID-19 lockdown

Shanghai authorities say they will take some major steps Wednesday toward reopening China's largest city after a two-month COVID-19 lockdown that has throttled the national economy and largely bottled up millions of people in their homes.To get more news about shanghai covid cases, you can visit shine news official website.

Full bus and subway service will be restored as will basic rail connections with the rest of China, Vice Mayor Zong Ming said Tuesday at a daily news conference on the city's outbreak.

Schools will partially reopen on a voluntary basis for students and shopping malls, supermarkets, convenience stores and drug stores will continue to reopen gradually with no more than 75% of their total capacity. Cinemas and gyms will remain closed.Officials, who set June 1 as the target date for reopening earlier in May, appear ready to accelerate what has been a gradual easing in recent days. A few malls and markets have reopened, and some residents have been given passes allowing them out for a few hours at a time. In at least some chat groups, cynicism about the slow pace and stop-and-go nature of opening up gave way Tuesday to excitement about the prospect of being able to move about freely in the city for the first time since the end of March.

Shanghai recorded 29 new cases on Monday, continuing a steady decline from more than 20,000 a day in April. Li Qiang, the top official from China's ruling Communist Party in Shanghai, at a meeting Monday was quoted as saying that the city had made major achievements in fighting the outbreak through continuous struggle.

The success came at a price. Authorities imposed a suffocating citywide lockdown under China's "zero-COVID" strategy that aims to snuff out any outbreak with mass testing and isolation at centralized facilities of anyone who is infected.

Schools will reopen for the final two years of high school and the third year of middle school, but students can decide whether to attend in person. Other grades and kindergarten remain closed.

Beijing, the nation's capital, further eased restrictions Tuesday in some districts. The city imposed limited lockdowns, but nothing near a citywide level, in a much smaller outbreak that appears to be on the wane. Beijing recorded 18 new cases on Monday.

buzai232 Aug 10, 07:07PM · Tags: shanghai news

Forex Trading: A Beginner’s Guide

Forex (FX) is a portmanteau of foreign currency and exchange. Foreign exchange is the process of changing one currency into another for a variety of reasons, usually for commerce, trading, or tourism. According to a 2019 triennial report from the Bank for International Settlements (a global bank for national central banks), the daily trading volume for forex reached $6.6 trillion in 2019.To get more news about 嘉盛外汇, you can visit wikifx.com official website.

Trading currencies can be risky and complex. Because there are such large trade flows within the system, it is difficult for rogue traders to influence the price of a currency. This system helps create transparency in the market for investors with access to interbank dealing.

Retail investors should spend time learning about the forex market and then researching which forex broker to sign up with, and find out whether it is regulated in the United States or the United Kingdom (U.S. and U.K. dealers have more oversight) or in a country with more lax rules and oversight. It is also a good idea to find out what kind of account protections are available in case of a market crisis, or if a dealer becomes insolvent.

Read on to learn about the forex markets, what it's used for, and how you can get started trading.
What Is the Forex Market?
The foreign exchange market is where currencies are traded. Currencies are important because they allow us to purchase goods and services locally and across borders. International currencies need to be exchanged to conduct foreign trade and business.

If you are living in the United States and want to buy cheese from France, then either you or the company from which you buy the cheese has to pay the French for the cheese in euros (EUR). This means that the U.S. importer would have to exchange the equivalent value of U.S. dollars (USD) for euros.

The same goes for traveling. A French tourist in Egypt can’t pay in euros to see the pyramids because it’s not the locally accepted currency. The tourist has to exchange the euros for the local currency, in this case the Egyptian pound, at the current exchange rate.

One unique aspect of this international market is that there is no central marketplace for foreign exchange. Rather, currency trading is conducted electronically over the counter (OTC), which means that all transactions occur via computer networks among traders around the world, rather than on one centralized exchange. The market is open 24 hours a day, five and a half days a week, and currencies are traded worldwide in the major financial centers of Frankfurt, Hong Kong, London, New York, Paris, Singapore, Sydney, Tokyo, and Zurich—across almost every time zone. This means that when the U.S. trading day ends, the forex market begins anew in Tokyo and Hong Kong. As such, the forex market can be extremely active anytime, with price quotes changing constantly.
A Brief History of Forex
In its most basic sense, the forex market has been around for centuries. People have always exchanged or bartered goods and currencies to purchase goods and services. However, the forex market, as we understand it today, is a relatively modern invention.

After the Bretton Woods accord began to collapse in 1971, more currencies were allowed to float freely against one another. The values of individual currencies vary based on demand and circulation and are monitored by foreign exchange trading services.

Commercial and investment banks conduct most of the trading in forex markets on behalf of their clients, but there are also speculative opportunities for trading one currency against another for professional and individual investors.An investor can profit from the difference between two interest rates in two different economies by buying the currency with the higher interest rate and shorting the currency with the lower interest rate. Prior to the 2008 financial crisis, it was very common to short the Japanese yen (JPY) and buy British pounds (GBP) because the interest rate differential was very large. This strategy is sometimes referred to as a carry trade.

An Overview of Forex Markets
The FX market is where currencies are traded. It is the only truly continuous and nonstop trading market in the world. In the past, the forex market was dominated by institutional firms and large banks, which acted on behalf of clients. But it has become more retail-oriented in recent years, and traders and investors of many holding sizes have begun participating in it.

An interesting aspect of world forex markets is that there are no physical buildings that function as trading venues for the markets. Instead, it is a series of connections made through trading terminals and computer networks. Participants in this market are institutions, investment banks, commercial banks, and retail investors.

The foreign exchange market is considered more opaque than other financial markets. Currencies are traded in OTC markets, where disclosures are not mandatory. Large liquidity pools from institutional firms are a prevalent feature of the market. One would presume that a country’s economic parameters should be the most important criterion to determine its price. But that’s not the case. A 2019 survey found that the motives of large financial institutions played the most important role in determining currency prices.

Forex is traded primarily via three venues: spot markets, forwards markets, and futures markets. The spot market is the largest of all three markets because it is the “underlying” asset on which forwards and futures markets are based. When people refer to the forex market, they are thus usually referring to the spot market. The forwards and futures markets tend to be more popular with companies or financial firms that need to hedge their foreign exchange risks out to a specific date in the future.

buzai232 Aug 9, 08:30PM · Tags: wikifx

Service Robot Market Looks ‘Rosie’

For those of us a certain age, the phrase “professional service robot” conjures the image of The Jetsons’ Rosie the Robot. It turns out service robots can do much more than vacuum under the table. The next generation of AI-enable automatons is spawning a new product category branded by one market research firm as the Internet of Robotic Things.To get more news about GLP Robotics, you can visit glprobotics.com official website.

In an industry survey, Coherent Market Insights foresees IoRT as nothing less than an “emerging dynamic in the market that combines an autonomous robotic system with the Internet of Things capabilities.” Along with AI, the autonomous platforms combine machine vision via connected sensors with embedded “smart objects.”

Those advances will translate into a market forecast approaching $110 billion by 2027, the survey concludes, with various government agencies pouring millions of dollars into R&D. The U.K. government, for instance, announced a roughly $40 million research effort to develop safer service robots.Applications abound, according to the bullish forecast, especially in sectors ranging from healthcare and construction to logistics and supply chain management. A far more controversial application is robotic soldiers, an ethical minefield if there ever was one.

The market tracker notes that service robots are best suited to assisting human operators, performing mundane, repetitive tasks as well as dangerous ones. While remotely-controlled robots have long been used to help defuse bombs and other hazardous missions, the pandemic is creating healthcare uses cases such as UVD robots used to disinfect hospital rooms with ultraviolet light.

Meanwhile, AI is imbuing service robots with machine vision capabilities that enhance their ability to sense and navigate. According to the industry survey, “AI-enabled robots can learn to perform their tasks from humans through machine learning and modify the tasks as per requirements.”

By way of example, the study noted that Qualcomm Technologies released a robotics development platform last year. Dubbed RB5, the development kit is designed to help build consumer and industrial robots incorporating 5G connectivity, on-device AI and machine learning as well as intelligent sensing capabilities. RB5 is based on Qualcomm’s QRB5165 processor, which it tailored to robotics applications and integrated with the company’s AI engine.

As the ecosystem for development emerges, along with new use cases, Coherent Market Insights forecast the professional services robot market will grow at a compound annual rate of 24.5 percent.Along with familiar names like Roomba maker iRobot and Boston Dynamics, the expanding market is expected to attract heavy hitters like Robert Bosch and Northrop Grumman Corp.

Still unresolved is an AI trust issue raised by our colleague David Benjamin in the context of self-driving vehicles: Will AI eventually confer unto service robots and their algorithms human-like emotions like fear, empathy and Rosie the Robot’s remarkable ability to put up with a whacky cartoon family?

buzai232 Aug 9, 08:04PM · Tags: robotics as a service

Top 6 Trends in in Computer Aided Design (CAD) Software Evolution

Ever since manual mechanical drawings were replaced by the computer aided design (CAD) applications, the world of manufacturing and mechanical design has never been the same and continues to advance with new technologies.To get more news about mechanical cad drawings, you can visit shine news official website.

Over time, more and more features have been added to the core CAD systems moving from 2D to 3D models with added bill of materials modules and new design features to support more complex designs and tools to help the designer create designs faster. We’ve seen applications developed to scan physical items converting them to 3D models automatically. And now we’re on the edge of a completely new era in CAD applications leveraging Industry 4.0 technologies offering features we could only have dreamed about just a decade ago.
1. Virtual Reality (VR)
Over 30 years ago,2D graphics and drawings gave way to 3D modeling allowing engineers and designers to see the product or object from different perspectives. Now any product or design proposal can be represented easily on a mobile or computer divide or even by printed copy to vendor and clients.

It has become a mandatory application in production and manufacturing fields for its use in from visualizing to showing assembling process of individual parts of a product. Not only it is making it very easy to communicate, talk and represent it at front of everybody very easily but also from the 3D details of each parts it helps to extract many data & information at very fastest way.The latest advancements in CAD are moving 3D modeling even further by leveraging virtual reality and augmented reality whereby engineers wearing special equipment can virtually interact with their designs.

These technologies allows engineers even more freedom than ever before to create and manage complex engineering designs and the technology can make the design process much faster and easier to understand for non-engineers who need a simple way to visualize the part designs.

2. 3D Printing
Additive manufacturing leveraging 3D printing technology has been around for more than a decade but recent advances in technology have made it much more affordable and practical for both low volume rapid prototyping and high volume production. With the time and development of technology it is now easy and inexpensive to get a 3D model printed.

There are lots of software and applications to process 3D printed objects from a 3D CAD model that is using a variety of materials including traditional plastic materials and now most metals, ceramics, concrete, and other materials. Some popular 3D printing applications are Cura, Meshlab, Netfebb, 3D Tool Free Viewer, Sketchup, Blender and many more.

In fact, most major CAD applications now support direct interfaces to popular 3D printers making the process even easier. Additive manufacturing is revolutionizing engineering and design making it easier to create products that previously would have required longer lead times and complex assemblies that can now be printed all at once for a more cohesive and complete product.

While many industries are slow to adopt additive manufacturing, it is becoming increasingly popular across most industry segments including jewelry, aerospace and defense, automotive, art and sculpture, architecture, and other industry
segments.

3. Artificial intelligence
Artificial intelligence integration with Computer Aided Designs is another trend reshaping the industry. Not only can digital scans of solid objects be converted easily into 3D CAD models, but the software is now able to leverage artificial intelligence to make the designs even more complete as machine learning can figure out missing information and can recommend new ways to modify the designs making them stronger and more versatile.

As artificial intelligence uses computer to do things that used to require human-level intelligence, it is saving time as humans can function and complete multiple tasks at the same time they used to spend before on one project. By providing the algorithms that makes the machines smarter and thus give AIa way to become more intelligent by the time goes on. AIto is expected to grow toa $16 billion industry by 2022, according to a projection from research firm MarketsandMarkets.

4. Cloud Deployment
The trend of storing all kinds of files online in “the cloud” spans every aspect of our daily lives from online banking to social media to streaming music and video and even sharing our favorite vacation pictures with family and friends. Cloud technologies are now sweeping through the CAD world as CAD vendors are beginning to move their applications from the desktop to the cloud making them easier to deploy, easier to update, and easier to collaborate with other external contributors to the design process including third party consultants, customers, and vendors alike. Further, there are many growing cloud databases of product designs available supporting the additive manufacturing 3D printing needs of consumers and manufacturers. The day is not far away when all CAD applications will be accessed and used through a web browser and there will be no software to install or to maintain. You will simply login and start designing.

5. Internet of Things(IoT)
Internet, mobile,RFID, and other technologies are changing the way we interact with the world allowing devices and parts to communicate with us through technological interfaces. It’s not uncommon for a machine to send a code when a part is starting to break down and may need repair and products can tell us when they are low on power or when they have been moved and where they are physically in the warehouse. Further, RFID technology has so many applications today that we could never have dreamed. A simple RFID chip can tell us if a crate of perishable products has a high bacteria count,has been exposed to extreme heat, or even if it has been exposed to sunlight.

The Internet of Things (IoT) is colliding with CAD technologies –not only in the design of products but also in the way products leverage IoT themselves. Washing machines and dryers, toasters, refrigerators, cars and trucks, and robotic vacuum cleaners are just a few examples of devices that now connect to us through wireless technologies and our smart phones. We’re able to control products like never before and these new technologies require new designs to accommodate the connectivity issues and challenges in the real world –something that designers never had to consider in the past.

6. Engineering Automation
Engineering and manufacturing have remained separate for decades. Engineers work every day inside CAD applications –building and revising products. They have their own engineering bills of material and rarely (if ever) login to the company’s ERP system where manufacturing is planned and executed. The ERP system has its own manufacturing bill of material, routing (with labor operations), and items. New technologies like CADTALK allow engineers to design products in CAD with the data transformed via artificial intelligence into manufacturing bills of material, routings, and items in the ERP system in seconds –something that would have taken hours or days of manual data entry in the past.

There are so few products on the market like CADTALK that there is no name for this category of software. It’s really a subset of a broader category of data integration applications but it’s so much more. With specialized artificial intelligence and deep integration with CAD and ERP, it’s really a software category in and of itself.

buzai232 Aug 9, 07:52PM · Tags: mechanical cad
Pages: « 1 2 3 4 5 ... » »»