User blogs

FLEXO VS. OFFSET PRINTING (THE 3 MAIN DIFFERENCES EXPLAINED)

Although both methods use wet ink and printing plates, these two printing processes are quite different. Technically, offset printing can refer to any printing technique that uses a printing plate to transfer an image to an intermediate carrier and then onto the printed substrate. Whereas flexo transfers ink from the plate directly to the substrate.Get more news about Flexographic Flat Printer,you can vist our website!
Flexo and offset are both popular, but they perform their tasks differently. It is important to understand what roles they perform and have a clear understanding of both types of printing process. The type of press to use depends on the final product and quality required, as well as volumes and substrates.
DIFFERENCE 1: PLATES
As the name suggests, flexo printing utilises flexible plates for a rotary printing process. The plates are made from a photopolymer compound and are flexible enough to be wrapped around a printing cylinder. The relief image on the plate is fixed via a laser image-setter and the polymer in the ‘non-print’ areas is washed away in a processing unit, where it is dissolved into a solvent or water solution. Ink is transferred from the ink well via a rotating ‘anilox’ roller onto the flexo plate. A separate printing station & flexo plate is required for each colour to be printed. The image is then printed directly onto the substrate. The printing plates are quite durable and if stored correctly, can be re-used several times, before they eventually need to be replaced.

For offset printing, again as the name suggests, ink is transferred (offset) via a series of rollers onto the printing plate. This can be either a flat-bed or rotary process – depending on the type of offset press. The plate is usually made of aluminium. The complete wet image (either single colour or multicolour) is then transferred onto a ‘blanket’ and in turn onto the substrate, before drying.

DIFFERENCE 2: INK
Offset printing usually consists of four ‘process’ colours; cyan, magenta, yellow and key (which is black). Each colour has a dedicated printing station. Any spot colours are made from a combination of the process colours. Ink can be water based or UV curable.

Although process colours are also used in the flexo process, additional print stations tend to be used for spot colours. Spot colours can be supplied pre-mixed, or can be mixed in-house, as required. Flexo inks can also be water-based or UV curable. Solvent based inks can also be used. UV inks enable higher running speeds and can be left in the press at the end of the day, without the need to empty & clean each print station. Water based inks need to be removed from the press, when it is not in use – to prevent ink from drying on the rollers & in the ink trays.
DIFFERENCE 3: TYPES OF MATERIALS TO PRINT ON
Offset printing machines can print on materials such as; paper, metal, cardboard, cellophane and vinyl. The printing surface must be flat and smooth. It is excellent for printing newspapers, books, magazines, stationery, posters, brochures and so on. Generally, to print onto both sides of the substrate will require a second pass. Similarly, any die-cutting, slitting, folding, creasing, laminating, etc is done as a secondary, off-line process.

Flexography is used on both absorbent and non-absorbent materials, for example, cellophane, foil, cardboard, fabric, plastic, metal etc. It is mostly used for packaging; envelopes, retail bags, wallpaper, paper, newspapers, sweet wrappers, labelstock and so on. The main difference with both processes is that offset printing is only done on flat surface while Flexographic printing can be used on almost any substrate with a flexible surface. Flexo printing can achieve high speed production and many presses have multiple converting options integrated into the press, enabling a single pass operation.

Bed Mattress Machinery Line Automatic Pocket Spring Coiling Production Machine

We uphold the corporate spirit of'pursuing excellence and daring to innovate', adhere to the core concept of 'creating value for customers', committed to providing high-quality technical services and Mattress Roll Packing Machine, Pocket Spring Gluing Machine, Dual Wire Pocket Spring Machine to the society, and using our diligence and wisdom to create value for customers, employees and the company. We plan to build the company into a healthy, high-energy and win-win service platform to repay the society. Welcome to set up long-term relationship with us. We implement brand strategy, making the core value of quality and technology deeply rooted in people's hearts.Get more news about Electronically Controlled Spring Coiling Machine,you can vist our website!

Product advantages 1
Multiple axes CNC spring compression machine can be produced (0.15-12.0mm wire diameter). This machine has the characteristics of traditional mechanical spring compression machine. It is equipped withmodern computer-controlled servo system with high speed and accuracy.

Product advantages 2
The position of each axis, wire feed information,production speed, production quantity are displayed on the screen, the program information is easy to set and change on the keyboard, the pitch adjustment is convenient and flexible，the outer diameter axis is independent, and can be easily set by the program Adjust the size of theouter diameter, the compression spring machine can produce any shape of compression spring without adjusting the mechanical part, completely avoid the trouble of replacing the cam piece, adjustment and convenience.

Product advantages 2
The system is equipped with a computer and can store hundreds of work programs. Suitable for all kinds of compression springs, oil seal springs, pagoda springs，wave springs, clockwork spring, and various special-shaped springs, complex and difficult spring,etc.Automatic material feed frame1.Characteristics: timing, disconnection, (starved feeding), abnormal stops (deviation), automatic alarm stop run, induction
2.control, high safety control compatibility, can use for parallel or serial electric production machinery, to independent or
3.synchronization feeding material.Automatic material feed frame

Why electromechanical door access is the future in a post-COVID world

The worldwide pandemic of COVID-19 brought life to a standstill, and while we are back up and running, society is not quite business as usual. Behaviour has changed, with individuals more conscious of protecting themselves and their families. This has included the rise in contactless interactions, with shops choosing contactless payments over cash, avoiding handshakes, and adding specific elbow or foot door openers to avoid touching handles. This trend has continued and looks to further into the future.Get more news about hardware electromechanical wholesaler,you can vist our website!

This is why taking advantage of electronic door entry systems is a great option, as it increases opportunities for contactless interactions. Supported by an increase in ‘smart locks’, remote entry via electromechanical door locking can come in a range of forms, including radio-based, fob, and smartphone.

Increased hygiene
Combining electromechanical locks with automatic openers is the most hygienic entry option and is especially useful for areas that see high traffic, such as businesses. This is more important now than ever before, as we move in a world that must deal with the challenges presented by COVID-19 on a day-to-day basis. Touchless and contactless entry means businesses are less reliant on cleaning staff to continually sanitise the door handles or touchpads.

This is also true for physical means of gaining access to the building. When users rely on their own smartphone, or fob, to gain access, there is a lower risk of transmission than every member of staff using a keypad a physical entry system. The Gilgen Electromechanical Door Opener further supports this and provides completely touch-free access.

Supports remote working
These forms of electromechanical locking systems support the idea of remote working. As we look to merge into the popular hybrid form of working we have experienced throughout the pandemic, workspaces are set to be more flexible. With flexible working comes increased risk, however. Fob access or smartphone access to a building allows employers to view who is within the workspace at a singular time, and track what time entry was made, without having to be present. This enables capacity to be monitored, to ensure safe numbers of employees in one space. For smaller businesses and homes, this type of door system is ideal as it allows close monitoring of entry and exits, offering protection for your property.

What are the different types of connector locking mechanisms?

Most connectors are equipped with a locking mechanism or ‘coupling system’ that allows the mating halves to be fixed together securely. This mechanical system holds the connectors in place to ensure a continuous connection, preventing accidental uncoupling.Get more news about Bayonet Lock Coupling,you can vist our website!

With so many types of electrical connectors and specifications available, it can be difficult to find the most reliable option for your applications needs.

The most popular types of connectors are referred to as circular connectors and rectangular connectors due to their shapes - let’s take a look into the common locking mechanisms available for these formats.

Bayonet locking
Most people will know a bayonet as a weapon – a blade that can be fixed to a firearm – but this military use also inspired the engineering term. A bayonet coupling system uses a plug or pin on one side and a receptacle or hole on the other, which requires rotating to engage or disengage.

Bayonet connectors are easy to operate by pushing the aligned parts together and rotating until an audible clicking sound is heard. Not only is it quick to secure, but it’s also quick to decouple, as a 1/3 turn can swiftly lock or unlock the connector.

As rotation is required, bayonet locking mechanisms are typically used by circular connectors. These durable systems can then be used to transmit power or signals in a variety of applications. Its resistance to shock and vibration makes it ideal for use in outdoor equipment.

Screw locking
Screw locking is another term for threaded coupling, which is a simple and universally recognisable system that allows parts to be tightened to a specific torque. Typically, one part has multiple pins or sockets that insert into the opposing part, and the coupling ring on one half is turned to engage the threads.

Again, in order to twist the connector and engage the locking mechanism, the connector has to be circular. However, there are also rectangular connector designs that use screw locking mechanisms, though these operate a bit differently.

Central screw mechanisms for rectangular connectors tend to have guide pins on one part and a central screw on the other, which connect in more of a push-pull style and may have a spring-loaded mechanism to prevent the central screw from loosening under vibration.

Jack screw (or jackscrew) mechanisms for rectangular connectors are most often used with d-sub miniature backshells. Usually, the backshell has a jack screw on either side, and the panel connector houses internal threads for them to mount into.

New Electric Chain Hoist for Reliable Lifting and Higher Productivity

A new range of electric chain hoists, in capacities from 125 to 5000Kg, has been launched by Street Crane Company, the UK's largest crane manufacturer. Designed for durability and high productivity, the LX electric chain hoist gives precise and safe lifting for a range of industries. Commenting on the aims and achievements of the project, Street Crane managing director Andrew Pimblett noted, "The new hoists are aimed at the volume market and are ideal for localised workstations and production line applications where they might typically be used on jibs, monorails and light track crane systems." There are chain hoists to meet every need. Get more news about Standard Hoisting Plug,you can vist our website!

These include eye suspension models for fixed position lifting, powered or push trolley options, standard height models or hoists configured for low/restricted headroom situations. Options include multiple choices of hoist and travel speed, dual speed hoisting, enhanced environmental protection to IP 55, variable frequency travel drives, upper and lower hoist limit switches. IP54 is the default environmental protection standard and all the chain hoists are suited for temperatures from -20 to +50 degrees C. Safety is a key consideration.
Overload protection is provided by a slipping clutch and models feature high performance disk brakes. Plug and socket electrical connections are an option to simplify final fix installation. Where required the range of lateral travel can be limited by the use of limit switches. The chain hoist range offers several answers to height limitation. Low headroom hoists have a chain diverter so that the hook rises to the side of the motor gearbox to give an exceptionally low profile. Where headroom or the available operating envelope for the hoist is a more serious issue, hoists can be installed between the beams of a double beam crane to create a greater clear working height. Control options include 48Volt standard pendant or remote operation by radio device. Control units can be set-up for solo operation or to work twin hoists for tandem lifts. The LX chain hoist is built for world markets. Rated capacities can be expressed as Metric tonnes or US tons.
A wide selection of motor voltages enables hoists to meet different national requirements. Products are fully tested and certified under relevant EU and other international regulations. Street Crane is a world leader in overhead cranes and wire rope hoists that are used for heavy duty factory applications requiring lifts of up to 200 tonnes. Andrew Pimblett concluded, "It has taken many years to establish Street Crane as a global player in wire rope hoists and we are confident that the value offered by the LX electric chain hoist will be very attractive to our customers. Feedback from our international distributors has already been highly favourable."

A new range of electric chain hoists, in capacities from 125 to 5000Kg, has been launched by Street Crane Company, the UK's largest crane manufacturer. Designed for durability and high productivity, the LX electric chain hoist gives precise and safe lifting for a range of industries. Commenting on the aims and achievements of the project, Street Crane managing director Andrew Pimblett noted, "The new hoists are aimed at the volume market and are ideal for localised workstations and production line applications where they might typically be used on jibs, monorails and light track crane systems."

There are chain hoists to meet every need. These include eye suspension models for fixed position lifting, powered or push trolley options, standard height models or hoists configured for low/restricted headroom situations. Options include multiple choices of hoist and travel speed, dual speed hoisting, enhanced environmental protection to IP 55, variable frequency travel drives, upper and lower hoist limit switches. IP54 is the default environmental protection standard and all the chain hoists are suited for temperatures from -20 to +50 degrees C.

Safety is a key consideration. Overload protection is provided by a slipping clutch and models feature high performance disk brakes. Plug and socket electrical connections are an option to simplify final fix installation. Where required the range of lateral travel can be limited by the use of limit switches.

The chain hoist range offers several answers to height limitation. Low headroom hoists have a chain diverter so that the hook rises to the side of the motor gearbox to give an exceptionally low profile. Where headroom or the available operating envelope for the hoist is a more serious issue, hoists can be installed between the beams of a double beam crane to create a greater clear working height.

Expedited International Shipping - The Complete Guide 2023

While the definition varies depending on the shipping carrier, expedited international shipping is a fast-shipping option, which falls between overnight, 2-day, or any shipping option faster than standard delivery. The delivery time is shorter than standard shipping, as shipping trucks do not have regular stop-overs.Get more news about expedited international shipping ebay,you can vist our website!

The exact shipping timelines vary between couriers but it should always be much quicker than standard shipping options. Note that some shipping companies use express shipping and expedited shipping interchangeably. In this case, you must carefully read the expedited international shipping meaning, shipping services, delivery time, and shipping rate offered before deciding.
Expedited international shipping is one of many sellers' more expensive shipping options. It is costly because it is usually twice as fast compared to standard shipping options. However, we will also give you tips on reducing the shipping cost while achieving the same speed as expedited shipping.

In fact, this blog post will let you know of many perks that your eCommerce business can fully take advantage of! What are these benefits, and how can you lessen the costs? Leaf through this article to find out!
Meet Customer Expectations
It is essential to meet customers' expectations because it can inspire, encourage, and persuade them to make more purchases in the future. This is significantly true, especially for online shoppers buying from overseas brands, because they want to save time, money, and effort on purchasing something that isn't worth it.

One of the factors that can keep up with the demands of international customers is transit time. For overseas customers, getting their packages as soon as possible is a significant deal. This is why many online shoppers prefer to purchase locally to receive the package immediately. With the distance that separates the seller and the buyer, local-based stores have the leverage. However, you can turn this situation around by offering fast shipping similar to expedited international shipping but cheaper.

This is a perfect shipping solution during peak seasons and for time-sensitive products. Plus, it also benefits customers who need to receive the products immediately.
Increase Conversion Rates
Tracking your conversion rates helps you calculate the proportion of site visitors who became actual customers due to their visit. It's pretty challenging to be noticed by international customers, so when one visits your online store, always make sure they instantly convert into customers.

If you want to look more appealing to your international customers, offer faster shipping options, including expedited delivery and regular shipping, but more cost-effective. They are more likely to convert first-time buyers to repeat customers if you are more accommodating to these choices.

Man Builds Motorized Trash Bin Complete with Steering Wheel

There are all kinds of ways to make people smile. You can tell jokes, offer free hugs, or, if you're this guy, you build the world's only road-legal wheelie bin.Get more news about trash bin,you can vist our website!

Taxed and registered, the electric motor can propel the creation along England's roads at 8 miles per hour.There's a lot of negativity in the world one way or another at the moment, but what I try to do is bring some fun to people," says the almost 60-year-old inventor.

He often drives with the lid open for safety reasons, although a series of mounted cameras allow to him drive with the lid closed for a real shock to passersby.

He had originally set out to make the world's fastest lawnmower, but discovered that A: it had already been done, and B: the record was 140 miles per hour.Setting his sights instead on the world record for fastest motorized wheelie bin, he discovered the record was held by a man who did it in honor of his friend who had terminal cancer.

A black bear cub thought it was onto something this weekend when it figured out how to wheel a trash bin, but it hasn't quite mastered the bear-proof locks.

Home security video from David Oppenheimer in Asheville, North Carolina, shows the curious cub standing on its hind legs and dragging the bin down Oppenheimer's driveway, then pulling it onto the lawn.He then tips the can over and tries to pry it open, but bear-proof brackets get in the way, Oppenheimer told Storyful.

"Most of the bears around here pick up quick on that and don't bother with the effort to try to open it," he said. "This bear yearling cub hasn't figured that out yet."

Benefits of Copper CNC Machining with Reading Plastic

Copper's unique benefits and properties make it a valuable material for a wide variety of applications. Copper has excellent electrical conductivity, high corrosion resistance, and is easy to machine. With copper CNC machining, precise copper parts can be produced quickly and with a high level of repeatability, ensuring each part meets strict requirements and specifications.Get more news about oem copper spring,you can vist our website!

Copper is easily alloyed (combined) with other metals. While copper has excellent thermal and electrical conductivity, it is fairly soft and often needs to be strengthened for industrial applications. One of the most common copper alloys is beryllium copper (BeCu or CuBe), which contains 0.4 - 3.0% beryllium. CuBe grades can have strength as high as alloy steel, but are among the most expensive copper alloys. Their properties, however, make them a versatile and valuable material.

5 Properties of Copper Beryllium
Strength - The strongest of any copper alloys, CuBe has a tensile strength of 200,000 psi, on par with many high-grade steel alloys. CuBe also maintains its strength at low temperatures.
Hardness - CuBe's versatile hardness is one of its most sought after characteristics. It can be softened or hardened by applying different heat treatments. Often referred to as spring copper, it can be heat treated to an impressive level of hardness after being shaped into springs and other complex shapes, while still maintaining its other beneficial characteristics (such as electrical conductivity and corrosion resistance).
Electrical and thermal conductivity - Like other copper alloys, CuBe is an excellent conductor of electricity and heat. It is also non-sparking and non-magnetic, making it a popular choice for semiconductor components, electrical connectors and telecommunication parts.
Machinability - CuBe is easy to CNC machine while it is soft, achieving complex shapes and designs. It is then heat-treated to the desired hardness for durable, dependable parts.
Corrosion resistance - Copper and its alloys are naturally resistant to corrosion, making them a common choice for oil and gas equipment parts, automotive and aerospace components, electronic springs and connectors, undersea telecom parts, and marine equipment.

PCB prototypes improve design and production process

By testing the prototype, designers can also ensure that the PCB meets the required specifications and performs as intended.Get more news about oem pcb prototype manufacure,you can vist our website!

Prototyping a PCB is an essential part of the electronics design process. It helps to guarantee a high-quality end product.PCB prototypes enable iterative design. This method allows designers to make changes to the design and test the updated prototype. The goal is to achieve the desired performance and accuracy. This can save time and money compared to making changes during full-scale production.

This testing ensures that the board will work correctly with other components or systems in the project. Identifying any issues with the design can be done by examining the PCB. These issues may appear when the PCB is combined with other components or systems.

PCB prototypes can help detect mistakes in component placement. Examples of such mistakes include components placed too close to each other, or in the wrong place. These issues can cause interference or prevent the board from functioning as intended.

Identifying electrical shorts can be made easier with PCB prototypes. Electrical shorts happen when two or more electrical connections touch each other. Shorts can cause the board to malfunction or even damage the components.

Signal integrity issues occur when signals are distorted or lost as they travel through a board. PCB prototypes can help identify these issues. These issues can cause the board to malfunction or fail to meet the required performance specifications.

PCB prototypes can identify thermal issues. Examples include components that are too hot or lack proper cooling. These issues can cause the board to malfunction or even damage the components.

PCB prototypes can help identify problems during manufacturing. This includes mistakes in the process and defects in the board. These issues can cause the board to malfunction or fail to meet the required specifications.
Faster Development Time
Early Detection of Issues: PCB prototypes allow designers to test and validate the design before full-scale production. By catching design issues early on, designers can avoid delays that may occur during full-scale production. This can save time and money in the long run.
Iterative Design: PCB prototypes allow for iterative design, where designers can make changes to the design and test the updated prototype until the desired performance and accuracy is achieved. This can save time compared to making changes during full-scale production, which can be much more time-consuming and costly.
Faster Debugging: PCB prototypes can help speed up the debugging process, as issues can be identified and corrected on a small scale before full-scale production begins. This can save time and help ensure that the final product meets the required performance specifications.
Communication and Collaboration: PCB prototypes can also help speed up the development process by improving communication and collaboration among team members. By providing a physical representation of the design, prototypes can help ensure that everyone involved in the project is on the same page and working towards the same goal.

Diego Cocca es el nuevo entrenador de la selección mexicana de fútbol

El abyecto fracaso de México en la copa mundial 2022 en Qatar ha llevado a la inevitable contratación de un nuevo entrenador para el equipo nacional masculino, en este caso Diego Cocca, quien fue presentado en una conferencia de prensa el viernes.To get more news about Futbol México, you can visit futbol-mx.com official website.

El Cocca, de 50 años, es un argentino, al igual que El hombre al que reempla, Gerardo "Tata" Martino, cuya ignominiosa partida hace dos meses siguió a la eliminación de México en la primera ronda del mundial, marcando la primera vez desde 1978 que El Tri, como se conoce a la selección nacional, no logró llegar a la final 16. México empató a Polonia 0-0, perdió a Argentina 2-0 y terminó con un 2-1 ganado sobre Arabia Saudita que fue muy poco, muy tarde.

No es que llegar a los octavos de final hubiera curado todo lo que aquea al fútbol mexicano. La selección nacional de México había perdido su primer partido en los octavos de final seis veces consecutivas desde 1990, y además de apariciones en los cuartos de final en 1970 y 1986, este país loco por el fútbol nunca ha tenido ni el menor asomo de un campeonato de copa mundial para emocionarse.

Con ese fin — y con la llegada de la copa del mundo 2026 que será organizada conjuntamente por México, Estados Unidos y Canadá — el partido político Morena está tomando medidas para "transformar el fútbol" en México.

Ignacio Mier Velazco, miembro de la cámara de diputados y coordinador de Morena en esa cámara baja, anunció esta semana que prepara una iniciativa de reforma en la que se espera que México "deje de burlarse de sí mismo en los mundiales". Llamó a este momento "el momento ideal para evaluar el panorama del fútbol mexicano", desde problemas como la seguridad en los estadios hasta problemas como las instalaciones adecuadas para la práctica de la selección nacional y tener un mal modelo de negocios.

"Ser la sede de una copa del mundo por tercera vez" hace que este sea el momento oportuno para empezar a revertir años de "declive eminente a nivel competitivo".

Agregó: "es por eso que vamos a trabajar para no hacernos el ridículo, como lo hemos estado haciendo últimamente. [la falta de avance] Qatar no puede repetirse, especialmente en un país con toda la tradición futbolística que existe en México ".

Mier Velazco dijo que los directores de fútbol van a ser invitados a discutir su iniciativa, aclarando que "es un asunto que está en la agenda de la Comisión de deportes".

Tal vez uno de los puntos en la discusión será si Diego Cocca fue la elección correcta para asumir como el nuevo entrenador de la selección mexicana, o "gerente" como se le llama en muchos círculos de fútbol. Los comentaristas de fútbol de ESPN, Sebastián Salazar y Herculez Gómez, ambos tomaron una postura negativa, con Salazar diciendo que Cocca carece de experiencia, especialmente a nivel internacional, y Gómez diciendo que Cocca no es el adecuado. (las vistas contundde Salazar y Gómez se presentan en un video de 12½ minutos de ESPN FC o se escuchan como parte de un episodio de podcast de 70 minutos de "fútbol Américas". Ambos están en inglés).