In a market that is constantly evolving with new products and even new players, the incumbent leader Intel has just announced two new P and U-series mobile processors. We spoke to Daniel Rogers, Senior Director, Mobile Product Marketing and Intel, to understand the new processors better. Edited excerpts from the interview:To get more intel news, you can visit shine news official website.
How is the P and U series different from the rest of Intel’s portfolio?
Daniel Rogers: The P series is a new segment for us somewhat. We have had a 28 Watt thin and light design point for a few years, but the reality in the market was that most systems were built to 15 Watts traditionally. So this generation, we did something a bit different, we actually offered two product lines, a P series at 28W, and a U series at 15W. We did this really to drive more performance. P series is similar to our H series and is derived from that fundamental architecture, but we have optimised that for lower power for thin and light designs, so we can bring an enthusiast-class or a high-end creator type performance into that thin and light form factor.
Is there a specific target audience and how you sort of are planning to target them?
Daniel Rogers: The most important audience for P-series is creators on the go, folks who are doing video editing, but still need a thin and light form factor. So maybe they are not looking for a 16-inch with discrete graphics, they are maybe looking for a 14-inch, maybe a system that has great battery life with a nice camera, but they still need some horsepower to get those video editing workflows and photo editing workflows done. So that’s probably the most direct use of a piece or the perfect customer for the P-series.
Daniel Rogers: Certainly with fans. In general, it’s somewhere around 12 Watts and below for fanless. So here we are talking 20 to 28 Watts, sometimes 35 Watts. But the thermals are well managed so they won’t be extraordinarily loud or with poor skin temperatures. Like with our Evo program we put a lot of work in with our partners to make sure these are well-built, and they are still meeting the promise of a thin and light.
How are the two series different from each other?
Daniel Rogers: The P series starts with 14 cores. So it’s 14 cores and higher power. Our U series is more tailored. So it’s 10 cores, two performance cores and eight efficient cores and lower power. Other than that, at the technology level, they are very similar. The IO is similar. The breakouts are similar.
In the case of architecture, how are these mobile processors different from the other processors that you have?
Daniel Rogers: So we started with our desktop, which is an LGA socket, pins out, so end users can populate it. And so that’s a 16 core — eight performance, eight efficient cores. Then we moved on to our H Series product line or Halo mobile product line, generally paired with discrete graphics. So that’s just a one-click lower — 14 core with six performance cores and eight efficient cores. It has extra IO to attach to the discrete graphics. Then the mobile, we call it thin and light P series and U series, it goes all the way down to 9 Watts in very small package, very low power optimised for battery life, but of course, still great performance.
Daniel Rogers: Yeah, we are seeing quite a few new designs. There will be some sort of experimentation in the market, although P-series does sit in between our H series and U series. It is a value proposition, and it is delivering a level of performance that has not been offered previously.
Daniel Rogers: In 10th Gen, we started with, our VNI instructions, which has some nice speed-ups for some AI workloads and in 11th Gen, or Tiger Lake, we added our DB4A, which is another nice instruction on the GT side which gives an important acceleration in the like ML performance. These are accessed through the Intel one API framework. Many applications are using that today, like Gigapixel photo for example. Aside from that, it is essentially a similar implementation to 11th Gen. With our upcoming generation next year, we are bringing some specific IPs for AI.
Daniel Rogers: It is an exciting time in the silicon industry. Certainly, it’s an exciting time in the PC and other operating systems space as well. It’s a competitive world and I sort of love it. But we are very proud of what we brought with the 12th Gen and you will notice this in our launch materials where we share some of those performance comparisons. You can see how we sort of stack up this generation.
A lifestyle perspective of the adidas Yeezy Boost 350 V2 “Bone” aka “Pure Oat” is unveiled and it’s scheduled to kick off spring in serene fashion. Overall, the low-top flaunts a pristine white Primeknit upper that features tonal laces, heel pull tabs, and the distinct transparent mesh strip across its side panels. Finally, a matching semi-translucent ridged midsole that encases its signature Boost cushioning solidifies the profile nicely.To get more news about yeezy australia womens, you can visit yeezy-australia.tumblr.com official website.
Retailing for $230, look for this adidas Yeezy Boost 350 V2 at select Adidas stockists and online on March 21. For a complete guide including official photos, release dates, pricing and where to buy, visit: adidas Yeezy Boost 350 V2 “Bone”. Always keep it locked to KicksOnFire for the latest in sneaker news, release dates and where to purchase your favorite kicks.
Kanye West has had a very eventful year in fashion with two successful fashion shows at New York Fashion Week and the release of three sneakers that have sold out within minutes. The “Shoe of the Year” award from Footwear News will be added to West’s list of accolades this year at the 2015 FN Achievement Awards on December 2nd.
West released two sneakers this year, the Yeezy Boost 750 and the Yeezy Boost 350, but the 350 trainer will be honored with the distinction of Shoe of the Year.
The Yeezy Boost 350 released to the public for the first time on June 27. The trainer features an Adidas’ Primeknit upper that provides ultimate comfort and responsive support. The sneaker sold out in 12 minutes on its launch day, and it was made available again in a black colorway, which also sold out immediately.
The award-winning sneaker will release in tan this November following the launch of West’s much anticipated collaboration collection with Adidas, Yeezy Season 1, on October 29. The collection will release at over 300 retailers around the world including 6 Adidas Originals stores in Milan, Berlin, London, Shanghai, Seoul and Tokyo.
Ahead of the expected release, we now have an on-foot look at the adidas YEEZY BOOST 350 V2 “Bone.”The all-white take on Kanye West‘s beloved footwear model focuses on a tonal look with varied textures.To get more news about yeezy 500 australia, you can visit yeezy-australia.tumblr.com official website.
The adidas YEEZY BOOST 350 V2 “Bone” feature white Primeknit uppers with perforated layers underneath and transparent mesh strips along the lateral sides. Additional detailing comes in the form of weaved laces, heel loops, matching sockliners and YEEZY globe symbol marked insoles. Finishing up the design of the shoe are full-length BOOST midsoles encapsulated in white semi-translucent rubber that continue the tonal look.
Following last week’s official images, on-foot visuals of the adidas YEEZY BOOST 350 V2 “Bone” have now surfaced.
The upcoming iteration of the popular silhouette features a clean all-white colorway. The Primeknit upper comes with perforated layers, while transparent mesh strips grace the lateral sides to provide texture to the overall design. Completing the tonal look are the white weaved laces, heel loops, sockliners and full-length BOOST midsoles encapsulated in white semi-translucent rubber.
Kanye West and adidas are set to drop the Yeezy BOOST 350 V2 'Bone' in the coming days, and ahead of its arrival, we've got a chance to see just how it looks on-foot. Showcased in a set of photos from the Yeezy sleuths at @yeezymafia, the 'Bone' offers an ultra-crisp colour scheme and familiar Yeezy details, making it a versatile option for warm-weather wear – though keeping it clean might be a challenge!
Uppers are made from angelic white Primeknit and are split by a post-dyed monofilament side stripe. Placed on the shoe's lateral side, this stripe reaches from the heel to the forefoot before tapering off around the toebox, and its semi-translucent build offers a look under the shoe's hood, showing the tightly-woven midfoot Primeknit and the looser toebox, which offers enhanced ventilation. Unlike the recently-revealed Yeezy BOOST 350 V2 'Beige/Black,' the 'Bone' equips a heel tab for ease of entry and removal. Down below, bulbous, milky midsoles house a full-length BOOST cushioning setup to complete the look.
Previously known as the 'Pure Oat,' the adidas Yeezy BOOST 350 V2 'Bone' is set to receive an adidas and Yeezy Supply-exclusive drop on March 21. Like previous models, it'll be priced at $230.
The highlight for the week will be the Fed's monetary policy decision. The market is generally expected to maintain the $120 billion bond purchase scale, but the Fed may remain cautious because the recovery of Covid is an obvious concern, and Fed Chairman Jerome Powell (Jerome Powell) has made it clear that he hopes to look at employment for further progress.To get more news about scopemarkets, you can visit wikifx.com official website.
At the Jackson Hole seminar, Powell stated that "we still have a lot of work to do to get the maximum employment", and since August's employment numbers were clearly disappointing (235,000 vs. a consistent 733,000), he will remember to postpone the setting Until there is better news. We expect the announcement to be released in November, but for now, we can only expect cautious optimism and more explicit support for this year's reduction. However, it should be emphasized that this decision is completely independent of the decision to raise interest rates there is no way to automatically raise interest rates.
U.S Fed preview-what we can expect?
As the Covid cases seem to have peaked and the labour market is more constrained by labour shortages than weak demand, we expect the QE expansion announcement to be released in November. At present, we can only look forward to the cautious optimism in the statement and more clear support for the throttling of Jerome Powell's press conference this year. We also want to emphasize that this decision is completely different from the decision to raise interest rates-there is no automatic path to higher interest rates.
The new forecast will show that as inflation is revised upwards, growth will be revised slightly downwards. The big story may be the Fed's single-point forecast of interest rate hikes. Currently, 7 out of 18 officials use 2022 as the starting point for their salary increase, and one or two may advance their forecasts to 2022. We suspect that the current median will remain at 2023, but this will be a close decision.
The interest rate market will focus on three things. First of all, as long as there is any sign that it is about to taper. Second, any rearrangement of points. Third, any improvement on the repurchase transaction. The first one is about the back end. Although it is not expected to announce its withdrawal, any nod may push up long-term interest rates. The second is more front-end influence. At present, the 2-year return in the 20bp area contains the smallest risk of interest rate hikes and will continue into the third quarter of 2023. If you move this forward one year, then the 2-year discount looks wrong. The upward pressure on 2-year returns should continue. This is the most likely outcome of that meeting and will have a major impact.
The U.S dollar is back on track for gains as it begins the week higher ahead of the U.S Fed decision, traders are eyeing a signal on tapering.
The U.S. dollar also appreciated against the New Zealand dollar last week. NZD/USD fell after testing the falling wedge-shaped ceiling, which opened the door to the floor. Although the outlook remains bearish within the boundaries formed by the chart, the pattern is typical.
Ahead of the Fed decision, the pair will be eyeing the support level (Blue) for a downside direction, the opposite can happen if the price moves above the wedge ceiling.
We've all heard the saying, "if you have a job you love, you never have to work a day in your life." But if you are transitioning into full-time trading, it can be hard to work a job while building up your trading account.To get more news about blufx, you can visit wikifx.com official website.
It's important not to cut yourself off entirely from a reliable income source. That way, if your trading career doesn't work out, you'll still have something to fall back on. However, working long hours isn't always sustainable for healthy traders. So - what's the answer? What are the best day jobs for traders?
By nature of their expertise and flexibility, part-time day jobs work great for those looking to find a job that will help you support your trading career. Here are four day job options that can fit around your trading.
If you live in a big city, chances are there's an app that lets you drive your car as a taxi. You can do it as a side-hustle and earn. So, if you don't mind driving other people around, it could be great to start on Uber or Lyft. These services pay their drivers between 75% and 90% of their fare, which means you keep more of your money than with a traditional cab.
Benefits: As a cab contractor, you may set your own hours and trade hourly pay for flexibility. The company assigns contractors a predetermined number of hours to work. You have the freedom to work as little or as much as you choose during your shift. Being your own boss allows you to trade hourly work for freedom! Most drivers start with Uber or Lyft since it is free - unlike becoming a regular cab driver.
This is the best fit for you if: You already have the skills to drive, know how to use your smartphone, and live in an area where Lyft/Uber operates.
If you have a passion for travel, it's possible to turn your knowledge of specific regions into a paid tour guide. You can work with an established company or start your own business. If you have local expertise about attractions, restaurants, and hotels in a particular place, consider sharing your tips with other travelers through an online platform like TripAdvisor.
Benefits: Being a tour guide is enjoyable and well-paid. There are no scams, no late-night phone calls, and no bosses or coworkers to deal with. It can be a tremendously enjoyable career that allows you to travel for free... yeah, free trips to many intriguing destinations! With these part-time jobs, you may make a fortune from your passion for travel or change your hometown through tourism.
This is the best fit for you if: You have a knack for conversation, a good sense of humour, and a passion for your local area.
Freelancing is a great way to build a portfolio of business experience and potentially make some money on top of that. An excellent way to get started as a freelancer is finding something you enjoy doing and then pitching different online businesses with your skillset. If you have specific skills that aren't in demand as a freelancer, try using those skills as bartering material for other products or services.
There are several websites and marketplaces built around connecting people with these sorts of opportunities. For example, Upwork and Fiverr allow you to work remotely in almost any niche. You can sign up for an account at no cost, pitch with your skill set such as writing, graphic design, virtual assistant, accounting and bookkeeping, and more!
Working as a waiter or waitress is ideal for traders because of the flexibility in hours. You can work evenings, afternoons, or any odd hours - ideal if you have busy market schedules. Many waiters/waitresses are paid per hour, so even if the business does slow down or if the company picks up, this job can still be rewarding financially. This job also does not require any prior experience, so you don't need to spend money on extra certifications.
If you are experiencing stress from dealing with multiple offers, multiple agents, multiple counters, on multiple properties, etc, eBrokerHouse has the solution....and it's FREE.To get more news about advance stox, you can visit wikifx.com official website.
eBrokerHouse is a web-based transaction and offer management platform. Over 600,000 offers have already been submitted and managed though our offer portal. We allow you to receive offers on your listings direct from the MLS. All offers come into your account in one standard format. So no more managing multiple folders in Outlook combined with fax offers in manilla folders on your desk, offers with spilled coffee on them, offers in the back seat of your car, the offer you forgot at home, etc. With eBrokerHouse you have access to all your offers from anywhere at any time.
All offers will be online for you to view in a very organized and efficient manner. You can search and sort your offers by dozens of criteria. You can reply to all agents that have submitted offers with just one email, saving you a lot of time. (EX. Please submit your highest and best offer by the follwing date). In addition, you can track all details of the transaction, all parties involved, your correspondence with all parties, all closing info, and much more. The entire negotiation/counter process is done online in the same manner.
This is not digital signatures so there is no new "technology" for the listing agent, the submitting agents, or your clients to learn. This is as simple as attaching a document to an email. Nothing changes when dealing with your clients. You still work with them in the same manner you always have. They do not need to interact with our platform at all.
If you are managing Short Sale or REO transactions that require additional management, eBrokerHouse has you covered with those as well. We allow you to track loan and payoff information, reimbursements due, BPOs, HOA info, maintenance and contractors, utilities, cash for keys, contacts, tasks, and more.