User blogs

Sandwich panels typically consist of an upper and a lower painted metal skin and an insulating core made of rigid polyurethane foam. Before production, the skin layers are laminated with a protective film that must withstand all of the processing steps: from profiling and preheating, the application of the polyurethane core and its exothermic foaming reaction through to the cutting and stacking of the finished panels. Get more news about Bh-sandwich Panel Series,you can vist our website!

The foaming and curing of the polyurethane mixture poses a particular challenge as the energy released generates extreme heat in the panels. Even thinner panels can reach temperatures of up to 100°C whilst panels typically made for refrigerated storage conditions having an insulated core of up to 20 cm thick, can reach temperatures of up to 160°C during production. Any protective film used must be able to withstand these temperatures without peeling or melting whilst ensuring that the hot, freshly cut panels can be stacked together at the end of the production line, without the protective films fusing together.

With this new temperature resistant protective film which has been perfectly engineered for sandwich panels with a rigid foam PU core up to 20 centimetres thick, POLIFILM PROTECTION provides a tailor-made solution for these process requirements: The heat-resistant film made of polypropylene has a particularly high melting point of 160°C. Despite the poor wetting properties of polypropylene in general, POLIFILM PROTECTION have succeeded in equipping the film with a special water-based acrylic adhesive which also boasts a temperature resistance of up to 180°C.

There are several advantages for producers of foamed sandwich panels when using this film: Firstly, the new protective film guarantees uninterrupted and efficient production. Even after a comparatively short cooling phase, it prevents the stacked panels from fusing together. Secondly the scrap rate is reduced as the panels are no longer damaged when they are separated. Lastly, the surface of every PU sandwich panel is optimally protected from the start of production to the end of the construction work ensuring customer satisfaction.

“With our special film, manufacturers of PU sandwich panels ensure the quality of their products and improve their processing speed and reliability - production becomes noticeably more efficient. No other protective film on the market currently offers this added value,” explains Fulvio Camerini, Technical Director of the Italian production & development site of POLIFILM PROTECTION.

This small storage jar made of terrazzo will bring that nice touch of trendiness to your kitchen. looks great in an open shelve cabinet and cute when you place it on a table of desk. Jar is water resistant but is not dishwasher proof and not microwave safe. Expect variations in color and finish since each jar is unique.Get more news about Terrazzo Jar,you can vist our website!
The Avanti Coastal Terrazzo Covered Jar is made of resin combined with chips of multi-colored stones for the base with a sand dollar and coral added in hand-painted relief. Imported.

The Avanti Coastal Terrazzo Covered Jar is made of resin combined with chips of multi-colored stones for the base with a sand dollar and coral added in hand-painted relief. Imported.

· Dimensions: Ø 3.5" x H 4"
· Material: concrete
· Color: white / multi color
· Remarks: food safe / water resistant / NOT dishwasher & microwave proof

dolin Casting is a professional cast aluminum automotive parts manufacturer, and supplies utmost quality aluminum castings to many famed companies in automotive industry home and abroad. We have two aluminum casting processes to manufacture automotive parts.Get more news about Aluminum Die Casting Auto Parts,you can vist our website!

The one is pressure die casting process. Depending on the pressure applied, there are 2 types of pressure die casting processes: high pressure die casting and low pressure die casting. By utilizing aluminum pressure die casting process we can manufacture almost all the aluminum automotive parts as engine blocks, cylinder heads, pistons, connecting rods, transmission housings, wheel hubs, pump housings, carburetor housings, valve covers, steering gear housings, clutch housings, etc.

Aluminum gravity die casting is another most used process we apply to manufacture automotive parts. The quality processed by gravity die casting is between sand casting and pressure die casting. The most common aluminum automotive parts manufactured by this process are engine blocks, cylinder heads, intake manifold, etc.

Lightweight is what a car designer always pursues when designing cars, since less weight means less fuel consumption as well as less pollution. In this process, durable and light aluminum castings play a key role in automotive lightweight design. Especially in recent decades, the application of aluminum castings in automotive industry is increasing steadily. According to statistics, the global output of aluminum castings increased more than 3% yearly, while 60% to 70% of these aluminum castings are applied in automotive industry. In these countries with developed automotive industry, the greater part of aluminum castings are for automotive use. Take Japan for instance, 76% of aluminum castings as well as 77% of die casting components are used in automotive industry.

Take a 1.3 tons car for example, the fuel consumption will reduce 8% if the car weight goes down 10%. Put it in another way, gasoline saving will reach to 1L each 100km if the car weight goes down 10%. According to studies, aluminum application in automotive industry helps save around 50 million tons of CO2 emissions every year.

Under natural conditions, steel and iron components are easily corroded by the moisture or other substances in air. On the contrary, corrosion rarely happens on cast aluminum parts. It’s the dense oxide layer formed on aluminum castings surface stops the corrosion. Meanwhile, aluminum castings are suitable for variety of surface treatment processes as anodization, powder coating, painting etc. These processes will increasingly reinforce the corrosion resistance of aluminum casting parts.

Auto parts made by aluminum castings dramatically reduce a car’s weight, which make driving even more flexible, comfortable and stable. Compare with steel parts, aluminum auto parts have better property in energy absorption and energy dispersion under impact, which make driving much safer. Take auto-hubs for instance, lighter cast aluminum hubs help shock absorption, which makes it possible to apply even lighter buffers in a car. Lighter buffer help increase a car’s stability.

We hope that by improving our management level and work efficiency, we can provide customers with high-quality linear pendant lighting, led strip lights alexa compatible, e27 colour change LED bulb and further enhance the competitiveness of our company. We do our best to provide agile, reliable and value-added services to meet the ever-changing high requirements of customers. We warmly welcome you to visit our company and wish we will have chance to establish good and long time business relationship with all the customers from all over the world! We have established long-term cooperative relations with many companies based on the principle of "customer first, integrity first". Sincerely welcome friends from all walks of life to visit, inspect, guide and negotiate business. 'Teamwork, efficient work, considerate and meticulous, mutual benefit and win-win' is our enterprise spirit, our goal is to work with customers to achieve success in the near future.Get more news about aluminum housing triproof light,you can vist our website!

CE standard 25W waterproof led batten light used durable aluminum heat sink and milky white and clear Polycarbonate cover made the fixture impact resistance and UV stabilized is Reliable, environmentally friendly, without mercury and other harmful substances, and long life more than 50000 hours

25W waterproof led batten light used high quality and isolated driver accords with CE standard.Our LED light has an exceptionally high light output 130lm/w efficiency and is very energy efficient. It has been expertly designed to maximize lifetime and efficiency.

Energy Saving led batten light, the constant current unit, the reduction of power consumption, the smart IC chip effectively reduces the fluctuations of the current, the energy conversion rate of 90% or more.Compared with ordinary fluorescent lamps,led batten light built-in driver, without ballast and no frequent flash, Energy savings up to 80%.Easy to install, no need to hire an electrician.Surtable for indoor commercial/industrial Lighting.Which is deal for factory,warehouse,gymnasiums,shopping.

BEST ELECTRIC MOTORCYCLES OF 2022

Technical progress inevitably takes its toll and bikes equipped with a classic internal combustion engine are being replaced by modern, technically advanced, and environmentally friendly means of transportation equipped with electric traction. And today range of electric motorcycles is so wide that it is easy to get confused when choosing a suitable vehicle. In this topic, we want to give a selection of relatively affordable and high-quality electric bikes in 2022, as well as to say a few words about the criteria for selecting an electric motorcycle.To get more news about emobility, you can visit davincimotor.com official website.

Range. This criterion is measured in miles or kilometers and tells the user how much distance his purchase can travel on one charge.
The battery capacity. The greater is the value of this indicator, the more mileage the rider can count on – this model of the electric motorcycle will be preferable.
The engine power. The maximum speed of the machine directly depends on this value. But at the same time, you can not count on the long-term operation of the motor. The most expensive and popular models of electric motorcycles have a solid figure of power, as for electric transport.
Fully charge time. Few people calmly tolerate many hours of waiting, so it is better to give preference to those electric motorcycles, which require less time to recharge.
Manufacturing material. Elements of construction of the highest quality products are made of steel.
The build quality. This is a very important criterion because no technical characteristics matter if the motorcycle is not assembled qualitatively.
Price. Of course, no matter how you like this or that electrified motorcycle model, the cost will still be decisive. Affordable electric motorcycle can fit your goals as well.
Undoubtedly the most discussed electric motorcycle of 2021. LiveWire is the firstborn of a whole line of electric motorcycles and a project, the first prototype of which was presented back in 2014. Since then, it has been modified many times, and a production version was shown at the EICMA 2018 motorcycle show in Milan.

The LiveWire is the first all-electric motorcycle from the legendary American motorcycle maker. It is Harley-Davidson’s answer to the $30,000 electric vehicle market. It is the first serial electric motorcycle from Harley-Davidson. Although the brand’s market share is shrinking, don’t believe the manufacturer is going to give up its 115-year glory.

The base price of Harley-Davidson LiveWire starts from $30000. For this money, the company offers you acceleration from a place up to 100 km/hour in 3,5 seconds and a maximum range of 225 km.

Sports-racing representative of China. Equally suitable for both urban and rural conditions. Powerful engine provides the unit quite a sharp acceleration, and on the road surface it is supported by the front wheel with spokes and the rear cast performance. Can offer its owner a wide range of features: cushioning landing place, footrest, handles with “dimensions” and brake levers. It is possible to order Xinling (XL2000DQT-E) on AliExpress.

This New Electric Motorcycle Is a Waterproof Off-Road Beast

Electricity and off-road vehicles seem like natural bedfellows, when you stop and think about it. (See: the new GMC Hummer EV.) Off-roading is about getting away from civilization and appreciating nature — something much easier (and less impactful) when piloting a vehicle that emits little noise and no smelly, toxic emissions. And don't forget that the instantly available torque of electric motors provided added security and control in low-speed, low-traction conditions that pop up all the time when rock-crawling or trail-chasing.To get more news about ebike, you can visit davincimotor.com official website.

Until recently, the biggest problem has been that EV batteries simply haven't delivered enough range to make off-roading particularly feasible. With that changing, though, a new realm of electric off-road playthings is opening up. Zero Motorcycles and Polaris, for example, are teaming up to create new EV snowmobiles and UTVs in the near future ? but they're not going to be the only game in town. A new company called Volcon is looking to snag a chunk of the nascent EV powersports market — and their first product, an electric off-road motorcycle called the Grunt that's set to hit the trails next spring, just might have what it takes to woo internal combustion die-hards over to riding the lightning.

After all, the Grunt sounds awfully enticing, at least on paper. The EV bike will offer to to 100 miles of range, with a battery that can be hot-swapped on the go and the ability to be charged up in two hours on a household outlet. 75 pound-feet of torque means it'll be capable of reaching its 60 mile-per-hour top speed in six seconds flat from a dead stop. And the powertrain is rated to the IP67 waterproof standard, meaning you need fear no stream; indeed, the company says it can even be ridden underwater.

After the Grunt will come a pair of four-wheeled electric off-roaders: the Stag, a side-by-side set to debut in late 2021 with up to 225 horsepower and 150 miles of range, and the Beast, a four-seat UTV expected to arrive in 2022 that reportedly will be able to go 80 mph and dash from 0-60 mph in 4.5 seconds thanks to a maximum of 450 horses and 600 lb-ft of torque.

Of course, many a vehicular startup has made lofty promises that wound up deferred or denied. Still, if the Grunt proves as capable as it seems, Volcon seems to be setting themselves up to carve out a good-sized chunk of the soon-to-be-exploding EV powersports market. We can't wait to try it out.

Niu unveils electric scooters

Niu has presented a number of new models at the EICMA in Milan, including an electric scooter called MQi GT Evo that goes over 100 km/h and an urban electric motorcycle called RQi. For the first time, the Chinese manufacturer is also presenting micro-mobility products such as electric scooters and e-bikes at EICMA.To get more news about electric motorcycle for sale, you can visit davincimotor.com official website.

All in all, Niu is putting six new models in the spotlight in Milan: the RQi electric motorbike, two electric scooters called MQi GT Evo and NQI GTS, the KQi2 electric scooter and the BQi e-bike. In Europe, initially two of the three scooters (MQi GT Evo and NQI GTS) and the electric scooter will be launched from 1 March. The electric motorbike and e-bike will follow from mid-2022.

Let’s take a closer look at the novelties: The MQi GT Evo is the latest representative of Niu’s M series. It has been completely redesigned visually, has a top speed of a good 100 km/h and sprints from 0 to 50 km/h in 3.3 seconds. This top performance is achieved by a 5 kW hub motor in combination with two removable 26 Ah batteries (72 volts). Niu gives a range of up to 100 kilometres. According to the manufacturer, the batteries can be charged in less than four hours. Other features of the MQi GT Evo include a choice of four colours, keyless ignition and an electric anti-theft steering wheel lock. It is priced at €4,999 – “including three years of connectivity and app services”, according to Niu.

The MQi GT Evo embodies a number of new achievements for Niu. It is the Chinese company’s fastest electric scooter to date, with the most powerful hub motor to date and, for the first time, higher battery voltage (72 volts instead of 48 volts) than in previous models.With the RQi, Niu also has a new electric motorbike for the city in Milan, which it already gave a preview of at CES 2020. The drive consists of a 5 kW chain motor and two removable 36 Ah batteries (72 volts). The only performance figure Niu mentions is a top speed of a good 110 km/h. With a newly developed “Launch Mode”, riders are supposed to be able to get a boost at short notice. The Chinese again put the charging time of the batteries at just under four hours. Another feature of the RQi is the newly designed front and rear cameras. The price is 6,999 euros.

Next up is the NQi GTS, which is being upgraded for the 2022 model year. The model comes with a newly developed “V-engine” that is supposed to accelerate the scooter to over 80 km/h. The range is given as 70 kilometres. Niu quotes a range of 70 kilometres and a price of 3,999 euros.

At the same time, Niu is venturing into the scooter market. At the beginning of the year, the manufacturer presented a first example called KQi3, which is to be found in retail stores in Europe and the United States in spring. The KQi2, currently on display at the EICMA, is the youngest member of the electric scooter family: it reaches up to 25 km/h and is to cost 499 euros.

Niu is also entering a new market with the BQi e-bike. The model has a 250 W Bafang motor and a single-gear transmission. The electric pedal assistance is supposed to work up to a range of 100 kilometres. The manufacturer states the top speed as 25 km/h, the price as “under 1,500 euros”.

Finally, Niu is also putting the spotlight on a study of a hybrid motorbike called YQi at the Milan show, which combines a liquid-cooled 150-cc petrol engine with a centrally placed 2400-W electric motor. This duo is said to achieve “top speeds and acceleration times otherwise only found on motorbikes over 250 cc,” according to an accompanying statement. The production YQi is expected to be launched in the first half of 2023.

“We believe we can convince die-hard fans of petrol motorbikes that the future lies in electric mobility. The YQi is a motorbike that can help bridge the gap,” expresses Niu co-founder Token Hu.

A stainless steel kitchen sink should be the ultimate accessory of any kitchen. But since all stainless steel sinks come in different sizes and styles, selecting the right one may become a daunting task.

Before you window-shop for your next stainless steel sink, make sure that you have the correct dimensions of your counter top. As a rule of thumb, single basin sinks look better in smaller kitchens and for larger kitchens double-bowls or even triple-bowls are ideal.

If you have a standard size kitchen, it is very likely that you are using a double-basing sink, which fits perfectly in cabinets that are 36 inches long. If your next remodeling project does not include the change of these cabinets, it is best that you pick your new stainless steel kitchen sink with the same dimensions.

If you are rebuilding your kitchen and want to add a separate island as working area or even a dish washer, you can opt for a smaller single-bowl stainless steel kitchen sink, as these are more practical and take up much less space than traditional ones.

Keep in mind that though your next kitchen sink is for practical uses such as washing your dishes and preparing foods, a sink will add a stylish accent that no other item in the kitchen will. So, make sure that your current or future accessories match the look of your new kitchen sink, which may come as brushed metal or as a polished look.

Though the traditional stainless steel sinks come in these two styles, many manufacturers also offer other finishes, such as antique, copper, hammered, weathered, among others. To pick the right one it is recommended that you have an idea of the color and style of your cabinets and other accessories, kitchenware, appliances, furniture and even the color of your kitchen walls.

One major reason people choose stainless kitchen sinks is for their durability, low maintenance and low price. And some new styles of stainless steel sinks are designed with technological properties such as an undercoating that muffles sound. If you will be handling many heavy objects such as cast iron pots and pans, make sure that you ask about the strength of the material of your next kitchen sink. As a rule of thumb, a stainless steel kitchen sink made with a lower gauge will be sturdier and quieter.

High-end stainless steel kitchen sinks are made of 18 to 19 gauge.

If you are looking to entertain your relatives and friends, pick a kitchen sink that will offer a wow factor and become the conversation piece of you kitchen; a polished one may do the trick.

If you cook frequently, select a stainless steel kitchen sink with double-basins, as it will allow for more working space to cook efficiently and even hold foods as you cook them. You can actually speed up the cooking process by doing the dishes on one side as you use the other for your cooking needs.

Always ask for the opinion of your vendor before selecting the right kitchen sink, and bring photos of your kitchen or samples of the material of your counter tops to match with ease.

TORVA® is a top brand which concentrated on high-quality and perfect modern design kitchen sinks, it improve your house environment and max space utility. TORVA® officially entered the kitchenware market in 2017. Our goal is to create and provide utility, cheap, high-quality and beautiful kitchen utensils to every customer. Let them build own style kitchen. TORVA have a professional R&D team to create new products. The nanotechnology【Ceramic Nano Coating – HYDRO-REPELLENT, RUST-PROOF, SCRATCH-RESISTANT, HIGH TEMPERATURE-PROOF and ELEGANT】 leads the market for sinks, and multifunctional sinks will be launched soon.

TORVA mainly offers stainless steel kitchen sinks, all sinks are made of premium 304 stainless steel (T304 or SUS304), durable and strong. Handcrafted brushed finish to prevent scratches for long-lasting use in your busy kitchen.

世界最高のセックスロボットとAIセックス人形会社

長い待ち時間はすぐに終わるかもしれない。アニマトロニクスと人工知能を組み合わせた等身大のセックス・ドールズは市場に打撃を与え始めている。To get more news about リアルドール通販, you can visit riarudoll.com official website.

彼らはまだ開発段階にあるが、これらのプロトタイプは、完全に機能性ロボットはどのように遠く離れた将来のように見えるかもしれないのinklingを提供します。

テストが進行中で、これはまた、公共の議論が人々が彼らと対話することができる方法に言及しないように、人工的な恋人のデザインと外観に非常によく影響を及ぼすかもしれない時です。今日、あなたはすでにロボット愛の人形を家に連れて行くことができるか、ロマンチックで性的な会話のためにAIセックス人形個性をダウンロードすることができます。

そして、特定のSexbotとAIセックス人形プロジェクトが他のものよりさらに進行中である間、ライバルの会社はこの潜在的に非常に儲かるロボットパイの部分を望みます。よく知られたfrontunnerは、Realbotix（2015年のカリフォルニアのAbyss CreationsのマットMcMullenによって開始されるプロジェクト）です。それは民間企業であるので、Sexbotメーカーを見ている投資家は、残念なことに、どんな深淵作品株も買えません。

あなたがテレビと映画を見て楽しむならば、McMullenの仕事を見たかもしれません。

深淵の作品は、非常に人気のあるシリコンセックスドールをRealDretsは、映画やショーで登場しているラースと本物の女の子とアナーキーの息子を含むショー。

Realbotixプロジェクトは、特にRealdoll本体に取り付けられることができて、感覚の幻想を与えるロボットのトーキング・ヘッドをつくりました。これらの愛セックス人形はAnrdoidのみRealdolxアプリに人工知能のおかげで装備されています。顔も交換されることができて、特許を受けた磁気技術でロボット頭に付けられることができます。顧客が彼らの仲間の外観を選ぶことができる方法の多くの可能性があります。

伝えられるところでは、「ヘンリー」と命名されて、人形は英国のアクセントで話します。顧客が特別なカスタマイズを選ぶかどうかに基づいて、彼は11000ドル以上かかります。“ハーモニー”は、旗艦の女性モデル、4つのオプションの一つです。Animatronic AIセックス人形頭は、各々8000ドルから始まる安いです。

RealDolxアプリは、ロボットヘッドと統合されるパーソナリティを作成することができます。たった今、それはAndroidで利用可能で、30ドル/年かかります。しかし、仮想人形を持って、アバターと仮想セックスを楽しむには、RealDoll本体やロボットヘッドを必要としない。

アプリを使用すると、彼女の体の種類、スタイルを選択し、パーソナリティを仮想ガールフレンドを設計することができます。まだ、その能力を開発に行く方法がありますが、あなたの愛のコンパニオンは、あなたの好きな名前を覚えていることができますし、いくつかのセクシーなセックスチャットに従事する。

A New Damon Electric, New Alpinestars Airbag Vests

On top of all the expected unveilings of gadgetry aimed for fun and productivity, this year’s Consumer Electronic Show featured more compelling futuristic cars and car tech than we’ve seen in a while. It also was the site of some cool two-wheeled—and two-wheel-related—news.To get more news about ev, you can visit davincimotor.com official website.

We first saw Damon at CES two years ago. Back then it was showcasing a new electric motorcycle called the HyperSport that could switch from sport bike to touring bike at the push of a button: handlebars raised up, windscreen raised, pegs went back, seat slid forward, and voila, you go from hunched-over sport bike to more comfortable sport touring bike. At this year’s CES Damon Motors showed off its new limited-edition HyperFighter Colossus, “the ultimate stripped-down urban assault sportbike derived from Damon’s first bike, HyperSport.”

“The HyperFighter Colossus motorcycle redefines the streetfighter category with a powerfully-charged limited edition model,” said Jay Giraud, co-founder and CEO, Damon Motors. “The HyperFighter is a stripped-down demon of a bike that is not for the faint of heart, so that riders can fight traffic, fight gas, and fight compromise. We’re excited to give the naked sports bike fanatic everything they want, coupled with the unrivaled technological features found only on Damon bikes. Only 100 HyperFighter Colossus motorcycles will hit the road, making them highly coveted.”
The new bike promises 200 hp, “more than” 148 lb-ft of torque, 0-60 mph in less than three seconds, and a top speed of 170 mph. Range is listed at 146 miles. The HyperSport of two years ago was said to go 200 miles. Damon says something it calls HyperDrive is the key to the bike’s performance. It describes HyperDrive as the “world’s first monocoque-constructed, 100 percent electric, multi-variant powertrain optimized for maximum performance, design and safety,” which, to be frank, is more than a little vague. It looks like what they mean is that the battery pack is a stressed member of the frame, but that information is lost in the marketing gobbledeegook. Damon bikes do have Ohlins shocks, Brembo brakes and single rear swingarms.

Both the new HyperFighter Colossus and the HyperSport will come with Damon’s CoPilot—“a 360-degree advanced warning system that uses radar, cameras, and non-visual sensors to track the speed, direction, and velocity of up to 64 moving objects around the motorcycle for unparalleled situational awareness.” Both bikes will also get that transformational setup, Shift: “At the push of a button, patented electronic ergonomics allow riders to transform their riding position with adjustable handlebars position and a retractable windscreen to dramatically reduce wind resistance and increase long range comfort, all while in motion.”
The Damon website says the HyperFighter Colossus retails for a "subscription price" of $475 per month or $35,000 to buy, and that the bike can be reserved with a fully refundable deposit of $250. There is also a HyperFighter Unlimited 20 with a 20 kWh battery for $25,000 or $357 a month, and a HyperFighter Unlimited 15 with 15 kWh for $19,000 or $264 a month.

Damon claims to have $65 million in total funding, having announced December 8 that it had garnered $30 million in a Series B Funding round led by an entity called House of Lithium. A search for House of Lithium on Google shows a beachfront home in Newport Beach and a website showing a tattooed tough guy speeding about on an electric bicycle (not on a Damon). House of Lithium makes electric bicycles and looks to be led by a guy named "TJ," perhaps the guy with the tattoos and the beach house. So Damon Motors is getting help from a like-minded investor. Looking forward to riding one of these someday.

“It’s been a very busy Q4 for Damon, marked by massive momentum for the company, having secured an additional $30M in funding, global expansion into Europe, announcement of a 110,000 square-foot manufacturing facility in Surrey, British Columbia, Canada, to begin production in 2022; awarded 6 issued patents for its technologies, and surpassing a $45M milestone in orders for its flagship HyperSport motorcycle,” Damon said in a release.