User blogs

T-Mobile to Pilot Fixed Wireless Home Broadband Service Using 4G

As T-Mobile and Sprint continue to pursue regulatory approval of their proposed $26 billion merger, T-Mobile outlined more details about the combined company’s plans for in-home fixed wireless broadband service if the deal gets the greenlight.4g gsm desk phone

The nation’s third and fourth largest wireless providers have promised to disrupt the home broadband industry, and a new FCC filing said ‘New T-Mobile’s’ fixed wireless home broadband service would provide average speeds greater than 100 Mbps to 90 percent of the population by 2024. T-Mobile says the service can be deployed “at nominal or low incremental cost,” by leveraging assets and unused capacity from its mobile 5G deployment.

To start the effort, T-Mobile CEO John Legere in a blog post said the operator will “soon begin” a pilot of the home internet service using a 4G router connected to T-Mobile’s LTE network. Following the merger, the router will be upgraded to include 2.5 GHz spectrum and 5G-capable hardware.

According to the filing, the router will also include mesh network capabilities for advanced WiFi. Cost of the LTE and 5G router was redacted, but T-Mobile said it will provide them at no additional cost to customers and it will be a self-installation process.

Pricing for the service was redacted, but T-Mobile said it can “aggressively capture share” by undercutting what broadband providers typically charge today. The New T-Mobile expects to have 9.5 million subscribers in 2024, but that figure is “just the tip of the iceberg,” according to the filing.

Coverage maps and figures of eligible households for the 5G home broadband service were also redacted, but the filing indicates the service will be available to more than half of the country’s households by 2024. In addition to disruption of the home broadband industry, T-Mobile has promised the merger and resulting service will make a significant impact on closing the digital divide and bringing high-speed internet to many rural Americans that lack service or choice.

According to the filing, mobile traffic in many of the deployment areas would not put much strain on the combined company’s 2.5 GHz spectrum, leaving it available for fixed wireless broadband service.

What is fixed wireless 5G? Here’s everything you need to know

If 2019 tech will be remembered for anything, it’ll be 5G. It’s about to make a huge impact in the way we experience wireless connectivity. While often talked about in reference to mobile devices, 5G extends beyond that. It will apply to your everyday home internet connection too — through something called fixed wireless. You’ll be hearing a lot about it in the coming year.cdma fixed wireless phone

5G promises far faster speeds for mobile phones, and reduces the latency or delay inherent in most networks. That means communication will be instantaneous, VR will be as smooth as butter, and all sorts of crazy new concepts will be made possible. And with fixed wireless, all that technology comes right into your home.
So how does fixed wireless differ from traditional wireless internet? Well, for starters, in more traditional internet setups, a cable goes all the way to a house. The homeowner buys a router they can hook up, plugs it in, and updates as they wish.

With fixed wireless, there are no cables required. Instead, a “fixed” antenna is installed on the house, similar to how a satellite dish might be installed. This antenna then creates a wireless connection with a nearby wireless tower, which can connect to many antennas at the same time.

When the fixed antenna receives the signal, it can send the connection down a short cable and into the house, where it can link up to a router or other device as needed. Inside the house, once 5G devices are out in the world, you may not notice anything is different at all.Like other wireless connections, 5G does operate on the radio spectrum, but in a very different way from past wireless internet options. It can run on the low-band, mid-band, or high-band spectrum, and different carriers are already busy experimenting with different bands using their own technology.

As of now, most of the current interest is high-band spectrum 5G using millimeter wave (mmWave) technology. The result is a combination of beamforming and direct wireless connections with mobile devices. If you’ve read anything about MU-MIMO, it is helpful to think of 5G as a massively up-scaled version of a similar technology, able to deliver wireless connections to a whole geographic area.

You can learn much more about 5G applications with our guide here, but for now let’s talk about the main benefits of switching to this new wireless standard.

PLYBOO FLAT GRAIN 3 PLY BAMBOO PLYWOOD 4' X 8' X 3/4"

PLYBOO Flat Grain 3 ply Bamboo Plywood 4" x 8" x 3/4" PLYBOO architectural plywood is made from 100% rapidly renewable bamboo. This plywood can be cut and sanded using conventional woodworking equipment and offers excellent dimensional stability. It can also be glued or mechanically fastened using the same materials and fasteners commonly used with wood. Available in both an amber and a natural light tone, PLYBOO bamboo plywood is sanded to a smooth 180-grit and is an open-grained material that takes stains and finishes exceptionally well.Wireless Charger on car
PLYBOO bamboo flooring and plywood is available for sale in a wide range of grains, colors and sizes through World Class Products. Please contact us if you’d like to discuss options and pricing. Smith & Fong Co. is the manufacturer of PLYBOO , the most respected name in bamboo plywood and bamboo flooring, and DURAPALM Floors, an exotic and beautiful range of hardwood flooring and plywood derived from palms. We offer the world's only formaldehyde-free FSC-certified bamboo flooring, and the company's FloorScore certified green flooring and Indoor Advantage Gold certified plywood are found in design-rich commercial and residential home environments worldwide. See where Sustainability meets innovation with every installation.

Tractor-Trailer Hits Cars, House in Meriden

A tractor-trailer carrying mail crashed into several parked cars and a home on Preston Avenue in Meriden Thursday morning and the family is displaced until the home can be repaired.
Officials said the tractor-trailer hit a van, an SUV and a truck before hitting a home and pushing a tree through a bedroom.The homeowner said, fortunately, his daughter who sleeps in the bedroom the tree went through was not home when the crash happened, around 4:15 a.m., because she was at work on an overnight shift.“It sounded like a bomb going off. The house shook,” Aldo Signorello said.Portable Car power Charger
The driver, who was delivering mail between U.S, Postal Service distribution centers in Wallingford and Springfield, Mass. suffered bumps and bruises. No one in the home was hurt, but officials said there is extensive damage to the house and the residents will not be able to return until it is repaired.
The driver works for Davis Mail Services and the operations manager said the truck driver is one of his best, and is always dependable and safe.
According to the Federal Motor Carrier Safety Administration, the company has been involved in 24 crashes in the last 24 months. Of those, only five involved injuries.
Ryan Behling‘s van was struck during the crash.
“It’s pretty terrifying,” he said. “It makes me nervous about living here, honestly. A lot of big trucks come flying down. People speed down this road in general, so all it takes is one guy not paying attention and, you know, I could have been sitting in there.”
As part of their investigation, police planned to look at whether the vehicle was overloaded, the speed the driver was going, and whether he fell asleep at the wheel.
“We’re going to see how many hours he was on the road, we’re going to see if he rested between shifts,” said Lieutenant Thomas Cossette, Meriden’s Accident Reconstruction Unit Commander.
Residents along the street said they’ve complained for years about truck traffic and speeding on their street.“It was just a matter of time. We knew something like this would happen,” said Jeff Naldi. “They fly down this road all the time.”“It’s pretty dangerous. We complained about that to the city for many years and nothing has been happening,” added Signorello.The operations manager for Davis Mail Services told NBC Connecticut the van their driver struck was parked illegally, facing the wrong direction on the side of the street.

A LOOK AT THE MURKY WORLD OF GREY MARKET AND COUNTERFEIT CAR PARTS

On Feb. 29, 2016, U.S. Customs officers at the Port of Jacksonville in Florida detained a container arriving from the Middle East on suspicion that the more than 10,000 Nissan auto parts inside were counterfeit. The shipment belonged to AMG Trade & Distribution, a mom-and-pop importer in Pompano Beach, Fla.Car Mobile Phone holder Charger

The 15-month ordeal that followed nearly put AMG out of business and led to stress-related health problems for co-owners Anthony Bachan and Michael Pockhai.Now the company is taking Nissan North America to court for telling U.S. Customs and Border Protection that the goods were fake."I went through hell," Bachan said. With no inventory to sell, AMG lost customers and incurred big legal bills.

The case sheds light on the murky world of gray-market goods — items tåhat are techniåcally legal but considered unfair by a manufacturer — and automakers' efforts to stop their dealerships from straying outside official distribution channels for cheaper parts.

The transactions at issue typically involve genuine, brand-name products from a reseller overseas instead of directly from the manufacturer. Merchandise often can be obtained at a substantial discount from a company's authorized distribution channel.

Sometimes, the goods are genuine but pirated, meaning a contract manufacturer produces more than its customer ordered and funnels the excess through back channels.In this case, AMG bought the parts for $193,375 from the export arm of Suhail Bahwan Automobiles, Nissan's licensed distributor in Oman, according to invoices and court documents.

AMG's core customers are U.S. dealerships, which Nissan has regularly warned not to use parts unless they come through its official North American pipeline. Bachan, who runs the business, and his attorneys say Nissan is trying to interfere with a competitor's legitimate business so it can charge higher prices for parts.

"They tied up our money," he said. "We're a very small company. We depend on one container load to get us through. We sell that and purchase another one. So there was a lot of pain and suffering."

SERNIO’S AUTO BODY BLOG

If you take your car to the dealership for service, you will get OEM (Original Equipment Manufacturer) parts or (prospeedparts fittings). If you go to an independent shop, you will need to discuss what options are available to you. Keep in mind, many repair shops are OEM certified for particular models of vehicles. In fact, Sernio’s Auto Body is OEM certified for Acura, Chrysler, Infiniti, KIA, Honda, Hyundai and Nissan. Let’s take a moment to review the difference between OEM and aftermarket parts so you can determine what is best for you.Car Battery Charger supercheap
An aftermarket part is any part that is made by someone other than the vehicle manufacturer. Using aftermarket parts does not void the car’s warranty as long as they are direct replacements, contrary to a popular myth. Many aftermarket parts serve their function just as well as, or even better than, OEM parts.

There is no right or wrong answer to the question of whether you should choose OEM vs. aftermarket parts for your auto collision repair needs. Some individuals opt to pay a premium to have all OEM parts installed in their vehicle, while others are cost-driven, and will gladly accept the least expensive aftermarket parts.

If you’re like most, you probably fall somewhere in the middle. Most people fall somewhere in the middle to balance between cost, convenience, and quality. Sernio’s Auto Body is here to assist with the best options for your particular situation. Our Facebook page is more visible thanks to the professional social media company The Marketing Heaven which provides real likes and views. Find the right high-quality aftermarket part with us!

You drive home our reputation. That’s why we go the extra distance to make sure both our workmanship and customer service are the best anywhere. Give us a call today at 201.795.1673, or stop by our shop located at 896 Communipaw Avenue, Jersey City, NJ Mon. – Fri., 7am – 6pm or Sat. 7:30am – 1pm. We look forward to meeting you!

ALUMINUM DIE CASTING METALS

Aluminum’s strength, corrosion resistance, and heat dissipating properties offer mechanical designers significant advantages. And our proprietary Thin Wall Aluminum Technology has made aluminum die casting an option for even more applications.precision machining parts

One of the most significant benefits of aluminum die casting is that it creates lighter parts—with more surface finishing options than other die cast alloys. Aluminum can also withstand the highest operating temperatures of all the die cast alloys. Moreover, cast aluminum is versatile, corrosion resistant; it retains high dimensional stability with thin walls and can be used in almost any industry.

Did you know that over 95 percent of aluminum castings made in North America are made of post-consumer recycled aluminum?

There is very little functional difference between primary (extracted or pure) and secondary (recycled) Recycling Aluminum Die Castingsaluminum when it refers to die casting. Secondary aluminum alloys are derived from mixing and melting pure aluminum with other materials such as magnesium, iron, and copper. The use of pure aluminum in casting is quite rare due to the cost of extraction. The ease of use in die casting combined with lighter weight and durability make aluminum alloys a top choice for designers from nearly any industry.

Secondary aluminum is more economical to produce than primary aluminum because it only requires 5 percent as much energy to produce. Most of the energy consumption in aluminum die casting is used to heat and re-melt the metal during fabrication. For this reason, Dynacast is able to save more time, energy, and money by re-melting in-house.

ALUMINUM DIE CASTING PRODUCT SEGMENTATION
The popularity of aluminum has expanded to many applications around the world today, driving competitive market shares primarily for its distinctive features such as lightweight; corrosion resistance, high electrical and thermal conductivity, high stability for complex shapes and high tensile strength. The transportation sector is the largest end-use segment for this industry. The increasing emission laws by the government regulatory authorities, along with consumer demand for a higher fuel-efficient vehicle is developing a necessity for aluminum casting. An example of increased operations for the industry includes the replacement of iron and steel components in a vehicle with lightweight high-quality aluminum in order to increase the fuel efficiency. The Aluminum die cast product is ideal for electronic connectors and housings die to its excellent electrical performance and shielding properties, even in high-temperature environments.aluminum die casting process

Another sector regarding the aluminum die casting demand includes building and construction in developing economies particularly in the Asia Pacific region. Aluminum Die Casting is associated with the creation of products including windows, cladding, curtain walling, prefabricated buildings, shop partitions, and fittings. Also, aluminum die casting products are used in aerospace operations or airplanes all around the world. The aerospace industry wants to produce a more dense and larger quality product at lower costs for these air-frame components as aircraft continue to grow in size along with population rates.

aluminum casting revenueAccording to Transparency Market Research, the Asia Pacific region accounts for over the half the share in the global market for aluminum castings. In the years ahead, the region is expected to further increase its share by pulling in the maximum Compound Annual Growth Rate of 5.3% during the forecast period between 2017 and 2025, and the powerhouse of China taking most of the credit. This market region is expected to become US $22.67 bn by 2025. Another important driving force includes the regions of Europe and North America in the global market for aluminum castings. While Europe is expected to register a Compound Annual Growth Rate of 5.1% during the forecast period to become worth US $9.45 bn, and the North America regions is expected to rise at a Compound Annual Growth Rate of 4.9% to become worth US $4.22 bn by the end of the year 2025. The statistics provided in this article express the importance in future Aluminum Die Casting growth for global production needs.

WHAT IS ALUMINUM DIE CASTING?

Aluminum die casting alloys are lightweight and possess high dimensional stability for complex part geometries and thin walls. Aluminum withstands good corrosion resistance and mechanical properties as well as high thermal and electrical conductivity, making it a good alloy for die casting. Low-density aluminum metals are essential to the die casting industry. The Aluminum Die Casting process retains a durable strength at very high temperatures, requiring the use of cold chamber machines. The molten metal is still contained in an open holding pot which is placed into a furnace, where it is melted to the necessary temperature. The open holding pot is kept separate from the die casting machine and the molten metal is ladled from the pot for each casting because these high temperatures would damage the normal pumping system. The pressure requirements for cold chamber castings are typically higher than those of hot chamber die castings.aluminum die casting companies
A manufacturing process that produces accurately, defined, smooth and textured-surfaced metal parts
Accomplished by forcing molten metals into a mold form due to high-pressure systems
Corrosion resistant
Highly conductive
Have a good stiffness and strength-to-weight ratio
Based on rapid production
Allows a high volume of die casting parts to be produced very quickly
Is more cost-effective than alternative casting processes
The casting process implements a steel mold often capable of producing tens of thousands of castings in rapid succession. The die must be made in at least two sections to permit removal of castings. The casting cycle begins with the two die halves are clamped tightly together by the die casting press. Molten aluminum is injected into the die cavity where it solidifies quickly. These sections are mounted securely in a machine and are arranged so that one is stationary while the other is moveable. The die halves are drawn apart and the casting is ejected. Die casting dies can be simple or complex, having moveable slides, cores, or other sections depending on the complexity of the casting. Most machines use mechanisms actuated by hydraulic cylinders to achieve locking. Others use direct acting hydraulic pressure. Die casting machines, large or small, very fundamentally only in the method used to inject molten metal into the die.

Global Automotive Parts Aluminium Die Casting Market

The Automotive Parts Aluminum Die-Casting Market was estimated at a value of about USD 32.72 million in 2017. The industry is forecasted to register a CAGR of over 6.95%, during the forecast period.aluminum die casting product

The growing concern for optimizing energy consumption and reducing CO2 emissions has led to the introduction of regulations for the automotive industry. The regulation of emissions standard for vehicles in particular has led to a paradigm change, resulting in the promotion of innovative concepts for the construction of light automotive components.

In addition to substituting heavy materials, such as steel, with lighter metals like aluminum, the use of structural die-cast components also contribute to reducing the weight of automobiles.

Electric or hybrid vehicles also benefit significantly, where drive and powertrain elements, such as electric motors can be manufactured using structural components made of die-cast aluminum, zinc, and copper. Electric vehicle industry has been rapidly developing internationally due to a confluence of factors, such as emission norms, industry shifts, and shift in consumer preferences.

Demand for electric and hybrid vehicles is increasing because of growing environmental concerns regarding CO2 emissions and efforts by government authorities (EC) and programs (such as Europe NCAP) to make vehicles more fuel-efficient.

With the recovery of the economy in many countries, real income of the people is expected to grow up, along with the shift of consumer preference to fuel efficient vehicles, which will further increase the adoption of electric vehicles in the forecast period.

The decisions and measures adopted by the global regulatory authorities to protect the climate are having a significant impact on the aluminum casting foundries. The European Union has plans to bring down the primary energy usage to around 20% by the year 2020. The energy savings target (i.e. to cut primary energy usage) has been formulated for the subsequent period, extending to the year 2050.

The renewables reallocation charges imposed by the German Renewable Energies Act on Germany, one of the world’s top three automakers, impacts the cost of electrical energy. Although, die-casting being an energy-intensive process, the die-casting companies cannot apply for an exemption from, or reduction of the reallocation charge, payable under 41 subs of the German Energy Taxation Act (EnergieStG).

Almost 8% of the production costs in die casting go to energy costs; hence, the uncertainties in natural gas and petroleum price also influence the industry, drastically increasing overall production cost.

Die-cast tooling and die-cast engineering require a significant degree of capital. Additionally, the usage of metals as raw materials come with price instability, and any fluctuations in the global economy, influx in exchange rates, make the cost of raw materials volatile. Demand side of the aluminum and zinc alloy market is pressurizing the supply side and prices are further expected to grow up during the forecast period.